Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Spray Drying Equipment

This drying machine is applicable to drying for emulsion, suspension, pasted material, solution etc liquid. - details see: https://www.machineto.com/lpg-series-high-speed-acentric-spray-drying-machine-10295556

Air enters into air distributor at the top of drier through filter and heater, and hot air evenly enters into dryer in spiral way. Liquid material is carried to centrifugal atomizer at dryers top by pump through filter from liquid material tank, where liquid material is sprayed as tiny drops, it concurrent flows to contact air, then water rapidity evaporates to turn into finished product in very short time. Since finished product is discharged from drying tower bottom and cyclone separator, waste gas vent emptily by extracting blower.

Technical parameters of this drying machine:

Model	5	25	50	150	200-2000
Inlet temperature	140-350 Self-control
Outlet temperature	80-90
Water Max. evaporate amount kg/h	5	25	50	150	200-2000
Drive form of Centrifugal spray atomizer	Compressed air drive	Machinery dive
Max, rotating speed(rpm)	25000	18000	18000	15000	8000-15000
spray disc diameter(mm)	50	120	120	150	180-240
Heat source	Electricity	Steam+ Electricity	Steam+ Electricity, Oil	Coal gas ,air heating furnace
Electric heating max. power kw)	9	36	72	99
External dimension(L*W*H) (m)	1.8×0.93×2.2	3×2.7×4.26	3.5×3.5×4.8	5.5×4×7	According to practice to determine
Dry powder reclaim (%)	≥95

Note:Amount of evaporation of water relates to materiel feature and inlet, outlet temperature of thermal wind. Outlet temperature is 90, for its water vaporization curve, see above fig.for reference when choosing types)