low pressure drop easy installation heatless air dryer

low pressure drop, stable dew point,, suit different kinds of compressor, competitive price, FOB SHANGHAI USD: 500~5000 - details see: https://www.machineto.com/low-pressure-drop-easy-installation-heatless-air-dryer-10293661

Condition:New	Type:air dryer	Place of Origin:Zhejiang China (Mainland)	Brand Name:LINUO
Model Number:LN	Voltage:220V	Power(W):50HZ/60HZ	Dimension(LWH):7905201890
Weight:127KGS	Certification:TUV	Warranty:one year guarantee	Rated Inlet Temperature:≤38°C
Maximum inlet temperature:≤49°C	Inlet oil content:≤0.1ppm	Outlet Pressure Dew Point:-40°C (-70 °C is optional)	Adsorbent:Activated alumina or molecular sieve
Rated Working Pressure:0.6~1.0MPa(1.0MPa or above is optional)	Pressure loss:0.02MPa	Control Model:CPU (standard configuration), PLC is optional	Working Mode:Automatic switching between tower A and tower B, continuous working
Regeneration Air Consumption:14%	Product Type:compressed air

low pressure drop easy installation heatless air dryer

contact supplier for low pressure drop easy installation heatless air dryer

Heatless Regenerative air Dryer

Brief introduction:

Heatless desiccant air dryer adopts the way of using adsorbent media to adsorb the moisture and the contaminant from compressed air, the adsorbent media can be generated or purged from the moisture it collected and use again and again.

It adopts the outstanding design of two towers which simultaneous allows one is drying and the other is regenerating, with the 10 minutes working period by SIMENS control valve, this kind of air dryer is specially fit for the critical compressed air applications or for those in extremely cold ambient conditions where the moisture remaining in the air would freeze inside the compressed air system piping.

Advantage:

1. The excellent design of the two tower

It can ensure activated aluminium oxide contact time enough to dry the saturated wet air entering in dryer to the needed dew point, 30% extra desiccative can compensate the desiccative consumption and ensure the life time, then guarantee the best performance

2. Adopts the large scale diffuser

To ensure the air stream well proportioned to get through the desiccative level

3. Reliable controlling system

3.1 Within 10 minutes period dry the compressed air to very low dew point of -40°C or within 4 minutes period dry to -70°C,and can be conditioned at site

3.2 Micro CPU control way , and the PLC control is optional

4. System Pressure drop is lower than 0.02MPa

5. Easily operation & easily maintenance

Power on-off switch, the period mode setting, power on light, regenerative on light

Technical specification:

Rated Inlet Temperature: ≤38°C

Maximum inlet temperature: ≤49°C

inlet oil content: ≤0.1ppm

Outlet Pressure Dew Point: -40°C (70 °C below zero is optional)

Adsorbent: Activated alumina or molecular sieve

Rated Working Pressure:0.6~1.0MPa(1.0MPa or above is optional)

Pressure loss: 0.02MPa

Control Model: CPU (standard configuration), PLC is optional

Working Mode: Automatic switching between tower A and tower B, continuous working
Regeneration Way: Heatless regenerative

Regeneration Air Consumption: 14%
Cycle Period: 4~10min, adjustable

Power Supply: 220V/50HZ

Model	Processing capacity Nm3/min	Length MM	Width MM	High MM	onnection diameter	Weight KG
LN-10	1.3	640	550	1980	DN25	130
LN-15	1.7	660	570	1980	DN25	150
LN-20	2.0	660	570	2080	DN25	250
LN-30	3.0	780	720	1950	DN40	260
LN-50	5.0	780	720	2100	DN40	260
LN-80	8	860	810	2100	DN40	360
LN-100	10	880	850	2000	DN50	460
LN-130	13	880	850	2100	DN50	600
LN-170	17	1040	930	2150	DN65	1100
LN-210	21	1270	970	2150	DN65	1250
LN-270	27	1310	1100	2250	DN65	1500
LN-320	32	1310	1100	2550	DN65	1700
LN-400	40	1400	1200	2600	DN80	2000
LN-450	45	1450	1200	2400	DN100	2200
LN-500	50	1450	1200	2500	DN100	2300
LN-600	60	1650	1500	2550	DN125	2400
LN-700	70	1650	1500	2850	DN125	2800
LN-850	85	1900	1600	2680	DN125	3900
LN-1100	110	2300	2160	2670	DN150	4500
LN-1500	150	2600	2340	3100	DN150	5500
LN-2000	200	3000	2400	3100	DN200	7500
LN-2500	250	3000	2300	3400	DN200	8800