liquid nitrogen storage tank

liquid nitrogen storage tank, Material:SUS304,SUS316L-stainless steel tank, Capacity: 500L-20000L, ISO9001:2008,CE, ABB MOTOR - details see: https://www.machineto.com/liquid-nitrogen-storage-tank-10032059

Processing:Storage Tank,Manufacture	Condition:New	Place of Origin:Zhejiang China (Mainland)	Brand Name:JB
Model Number:JB-KW201	Processing Types:food,dairy,fruit juice, beverages,phamacy, chemical industry	Voltage:380v	Power(W):0.55-7kw
Weight:1ton-10ton	Dimension(LWH):1980*2000mm	Certification:ISO 9001-2008	liquid nitrogen storage tank:SUS304/SUS316
Thickness(Inside):3mm to 6mm (as size)	Heat preservation layer:50 to 70mm (as size)	Thinckness(Outside):1.5 to 3mm (as size)	Motor:Brand: ABB
Foot:Adjustable triangular bracket	Eddy-proof board:Eddy-proof board	Thermometer:According to customer requirements	Ladder:According to customer requirements
Liquid level meter:According to customer requirements

Performance;

The series of equipment have the functions of heating, cooling, heat preservation and mixing preparation. The vessel carries out design and processing according to “Technical condition for steel made pressure vessel”.
The specifications for selection are 0.05m³~5.0m³different volumes. It can also carry out the design and processing according to the actual technology requirements of customers.
Adopt interlayer structure, with the advantages such as large heating area and small welding etc.
The shaft seal adopts sanitary level hard alloy and silicon carbide 204 balancing mechanical seal, which is anti-abrasion and anti-press. The rotation speed is 60~82 r/m, and the speed can also be regulated by frequency converter.
The interface adopts internationally general-use standard ISO standard rapid installation chuck type, and the material is imported 316L or 304. The mirror polishing of internal surface Ra≤0.28μm,and the external surface adopts semi-luster polishing treatment.
The liquid meters for selection are glass tube liquid meter, static pressure sensor type liquid meter and supersonic wave liquid meter.
The structure forms are divided into upward and downward round sealing head or downward reverse convex bottom upward round sealing head structure, which can guarantee no residual of liquid medicine.
The jacket structure forms for selection are divided into standard jacket external coiled tube jacket, and honeycombed jacket. The structure is the combination of upward and downward round sealing head and standard layer jacket. It has large jacket space and large heating area, which can reduce the welding seam. The internal bladder is neat, which can guarantee that the material will not be hung on the wall. It has advantages such as beautiful appearance, simple structure and durability. The disadvantage is that it is too high. Additionally, if changing the reducer as horizontal worm gear reducer, the height can be reduced for about 250~330mm.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Stainless steel milk tank

Main technical parameters

Effective volume (L)	Dimension of tank Inside D×H(mm×mm)	Diameter inlet&outlet (mm)	Thickness inside&outside (mm)	Heat preservation layer (mm)	Power/Rpm (kw)
600	900×1000	38	2.5mm&1.5mm	50mm	0.55kw,36r/min
1000	1200×1000	51	3mm&1.5mm	50mm	0.75kw,36r/min
2000	1500×1220	51	3mm&1.5mm	50mm	1.5kw,36r/min
3000	1600×1500	51	3mm&1.5mm	50mm	2.2kw,36r/min
4000	1700×1830	63	4mm&1.5mm	50mm	2.2kw,36r/min
5000	1900×1830	63	4mm&2mm	50mm	3kw,36r/min
6000	2160×1830	63	4mm&2mm	50mm	3kw,36r/min
7000	2000×2440	63	5mm&2mm	50mm	3kw,36r/min
8000	2100×2440	63	5mm&2mm	50mm	3kw,36r/min
9000	2200×2440	63	5mm&2mm	50mm	3kw,36r/min
10000	2350×2440	63	5mm&2mm	50mm	3kw,36r/min

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

stainless steel mixing tank price

Technical Requirements:

1. Equipment used mechanical polishing, inner surface should be polished to 300MESH, outer surfacre should be welded joint, legs should be polished to 240MESH and Appearance using 2b.

2. Each tank has the leakage test for half an hour.If it has a jacket, after the successful test of a hydraulic test by inner tank, and then filling the insulation and fixing the outer jacket.

3. All welding is in accordance with the standard of JB/T4736-1997/JB/T4709-2000.

4. The welding structure type and size is in accordance with the standard of HG20583-1997.The flange welding according to relevant provisons of the standard of flange, The fillet weld leg size according to the thickness of a sheet.

5. The verticality is 1/400 between the flange flange agitator mounting surface and the axis of container.

6. All the leakage fillet weld should be ground smooth , butt weld should be polished to parallel and level with the base metal , all nozzles should be flanging and rounded Off.

7. All loose joint using the standard thread of SMS.

8. The hole of flange bolt should be equispaced 0°~180° with the main/vertical line of the relative equipment

9. When the equipment is for hydraulic pressure test,it should control the contect of chlorine ion under 25mg/l in the water, and then which should be removed immediately.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------