Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Chemical Machine Parts

liquid ammonia cylinder, 1)Low pressure gas cylinder, 2) Model:R134, 3) Specification: 400-1000L, 4) Pressure:2-4pa - details see: https://www.machineto.com/liquid-ammonia-cylinder-10282062

liquid ammonia cylinder

First: Herewith the detailed reference of capacity and Filling medium:

Volume (liters)	Level pressure(MPa)	Standards(mm) Length*diameter*thickness	application	remarks
400	3	600*1800*6	R-134a,R22,R12,etc.Refrigerant cylinders	3MPa pressure level for the export-oriented
		600*1800*8	R-134a,R22,R12,Cl2NH3,SO2HF etc
	4	600*1800*10	R32,and other pressure level for the cylinder 4MPa
800	2	800*2100*6	R-134a,Cl2SO2HF etc, under 2MPa pressure level cylinder	Export-cylinder
	3	800*2100*8	R-134a,R22,R12, Cl2NH3,SO2HF etc	3MPa pressure level for the export-oriented
		800*2100*10	R-134a,R22,R12, Cl2NH3,SO2HF etc
	4	800*2100*12	R-32,and other pressure level for the cylinder 4MPa
926	2	800*2240*6	R-134a,Cl2SO2HF etc, under 2MPa pressure level cylinder	Export-cylinder
	3	800*2240*8	R-134a,R22,R12, Cl2NH3,SO2HF etc	3MPa pressure level for the export-oriented
		800*2240*10	R-134a,R22,R12, Cl2NH3,SO2HF etc
	4	800*2240*12	R-32,and other pressure level for the cylinder 4MPa
1000	2	900*2050*8	R-134a,Cl2SO2HF etc, under 2MPa pressure level cylinder	Export-cylinder
1000	3	900*2050*12	R-134a,R22,R12, Cl2NH3,SO2HF etc
800 840	2	800*2100*12	Cl2	Export-cylinder
		800*2200*12		Export-cylinder(Catheter-based)

Second: The instructions for use the cylinder:

1. There should adjust to the measurement scales before fill it.;check the table and the measurement lever. The weighing apparatus for filling should be examine once every three month,to ensure it accurate.

2.There must have specially person to examine the complete of the cylinder before filling it.

3.The ratio of filling is 1.25KG/L. Overcharge is strictly prohibited.

4.The cylinder after filled in must be re-inspect the filling volume.The error for the weighing must not exceed 1 of filling volume for twice.The re-inspection should change weighing instrument and the person.

5.It should be record for the weight of filling, for trace file of the working life.

6.It is forbid to put the oil,cotton and other combustible goods wich will react with the chlorine near by the cylinder.

7.It should set the check valve and sufficient volume of buffer tank which can prevent material downdraft with the cylinder and the reactor.And to prevent failure, we should conduct regular checks.

8.It should not set the cylinder at the stairs,sidewalks and ventilation system in suction mouth,and other place.

9.It should have the special opened wrench for cylinder and do not on other purposes.

10.It should operate slowly when open the bottle valve,and cannot keys too hard or strong when on closed

11. It should set needle valve adjustment of chlorine flow when for the export cylinder, and does not allow the use the valves regulate directly.

12.It must closed the cylinder valves immediately after the end of the operation.

13.It should ensure complete for the safety accessories,when returned the empty bottle to factory.

Third: Attention and protection measures for the cylinder with the filling of ammonia or other HAZ.:

1 Unscrew the lid of the ammonia cylinder slowly until you hear the hiss of air escaping the device. Keep far enough back from the cylinder to avoid inhaling any of the ammonia gas built up in the device. Typical cylinders such as a ammonia holds very little gas, but take every precaution to avoid inhalation such as wearing a protective mask.

2 Turn on the pool's filter and pump. When the pool is operating water flows through the plumbing into the cylinder, and this water pushes any air or gas in the cylinder up and out through the loosened lid.

Forth: What we can promise for you:
1. High quality and security gas cylinders
2. Best price in the market
3. Fast delivery (3~4 weeks)
4. Best after-sale service