Linear type hot melt glue labeling machine with OPP paper label

hot melt glue labeling machine, 1.use hot melt glue, 2.paper, opp, bopp label, 3.by PLC touch screen controller, 4.high spee - details see: https://www.machineto.com/linear-type-hot-melt-glue-labeling-machine-with-opp-paper-label-10058107

Type:Labeling Machine	Condition:New	Application:Beverage	Packaging Type:Bottles
Packaging Material:Plastic	Automatic Grade:Automatic	Driven Type:Electric	Power:5KW,according to customer
Place of Origin:Jiangsu China (Mainland)	Brand Name:OK	Model Number:SORAL	name:hot melt glue labeling machine
suitable bottle:PET bottle	label cost:very very cheap	suitable lable:opp,bopp	speed:2000-36000,adjustable
suitable bottle size:200ml-2000ml.change parts can offer	machine material:full stainless steel304	control way:PLC. touch screen

hot melt glue labeling machine

Parameters

Name	Linear type Hot melt glue labeler
Model	BDX-6P
Labeling type and material	Roll type; OPP, PVC, PAPER, etc.
Label size	As demanded
Glue type	Hot melt
Container diameter	30-120mm
Capacity	8000-25000bottles/hour based on 500ml
Voltage demanded
Supplying electric	380V x 50/60Hz x 3Phase
Operating electric	380V AC, 24V DC
Consumption	6.7KW
Main motor	1.5KW
Vacuum pump	1.5KW
Hot melt applicator	2.0KW
Glue part heater	1.7KW
Air pressure supply	4~6kg/ (dry & clean air)
Air consumption	400L/Minute
Pipe size	0.375 inch
Machine size	1600(w)x4000(L)x1300(H) infeed/discharge conveyor included
Weight	2500KG
Operating condition	20°C~40°C in dry place at the room's temperature)

Specifications instruction:

easy operation to adjust label cutting knife

vacuum drum made of high rigid material to avoid friction and static

rapid changeovers: modular design and quick release change parts have changeovers fast and easy in ten minutes

using handle to adjust the position of cutting knife is possible and exactly

vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material

automatic label length controller to adjust position of I-MARK

Machine description

roll-fed type

label in-fed from label station is conveyed to label in-feed roller through label guide roller

sensors will check I-MARK of label automatically when label reaches label in-feed roller

as soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position

label which has been cut is conveyed to vacuum drum

after checking label attached on vacuum drum by sensor, label is conveyed to glue roller and then inject hot melt on label

to adjust containers by in-feed star wheel and do labeling in roller zone for the first time and then labeling operation will be done perfectly by side belt.

Safety

control : PLC, inverter

safety attachments

Overload running safety equipment attached on driving zone

Stopper for abnormity operation of in-feed star wheel

No bottle fed (sensor check)

Overload for bottle fed (sensor check)

part of machine photo