Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Plasma Welders

has the cutting speed, narrow, small incision, Little deformation,save material and low costs characteristics . - details see: https://www.machineto.com/lg-series-air-plasma-cutting-machine-10138613

LG series air plasma cutting machine

1.Introduction

LG series air plasma cutting machine, to industrial frequency power and compressed air, can to all sorts of metal materials (stainless steel, carbon steel, alloy steel, aluminum, copper, nickel, titanium) cutting, digging holes, has the cutting speed, narrow, small incision, Little deformation,save material and low costs characteristics , and can be widely used in: ships, motor vehicle, automobile, boiler, machinery, metallurgy, water conservancy and other industries production.

2.Main technical specification

Item/Model	LG-40 (Single file)	LG-60 (Single file)	LG-80 (Single file)	LG-100 (Single file)
Inputpower	380V/50HZ	380V/50HZ	380V/50HZ	380V/50HZ
Input capacity	20.7KVA	33 KVA	52 KVA	65.4 KVA . KVA
Out current	100A	120A	160A	200A
Gascompression	0.45Mpa	0.45Mpa	0.45Mpa	0.45Mpa
Cutting thickness	1-30mm	1-40mm	1-45mm	1-50mm
Duty cycle	100%	100%	100%	100%
weight	70kg	85kg	100 kg	105 kg
Size L*W*H	660*375*610	560*370*660	655*430*750	655*430*750

To ensure that use safety, please observe the following precautions, maintenance, and be sure to switch off the electricity

3.Operation note items

1, Forbidden using in flammable and explosive gas' occasions.

2,In the installation, check, change Cut torch wards electrode, should confirm no safety so cutting machine disabled will be the power switch spin to "shut down" position.

3 ,Any part of the body should prohibited to contact at the end of Cut torch after starting up.

4,Cutting machine should keep clean,dry, prohibit to contact water, oil or other liquid and dust.

5,Equipment should be used according to marking duty cycle , refer to the use the instruction for using reasonable and safe.