led lights making middel reflow oven soldering machine

Easy operation\ Economic price \Exact temperture - details see: https://www.machineto.com/led-lights-making-middel-reflow-oven-soldering-machine-10138035

Type:Reflow Solder	Place of Origin:Guangdong China (Mainland)	Brand Name:WELDSMT	Model Number:W-F835-LF-C
Usage:as below	Voltage:as below	Weight:as below	Dimensions:as below
Rated Duty Cycle:as below	Rated Capacity:as below	Current:as below	Certification:as below
After-sales Service Provided:Overseas service center available

contact supplier for led lights making middel reflow oven soldering machine

Product features:

The multi- spots jet principle, entire journey hot blast transportsthe wind structure, about heats up the way; Heating zone windregulation short, heats up theefficiency to be extremely high.

It adopts high-efficiency pressurized air duct that can provide sufficient circulation air flow; no temperature interence occurs in each temperature zone and airoutput is equal;

Special imported long-life winding nickel-chromium heater thread is adopted so that high thermal efficiency and sensitivity, small thermal inertial can be achieved; the temperature control precision of each temperature zone is within ±1°C; air can be heated and circulated; temperature rise is fast and it takes approximately20min to reach the set temperature from room temperature.

It adopts imported high-temperature motor that can be connected directly to drive hot air to heat; equal hot air, low noise and slight shock can be achieved.

Standard two mandatory cooling zone, effectively meet the needs of various Lead process. (Optional industrial cooling fan forced cooling)

Dual module compulsory convulsion system, make assure the exhaust more environment-protective and the pot more clean.

The whole uses the twin cylinder to uncap the pattern, the operationsuccinct convenient security.

The whole system adopts electronic screw pole open cover module, operating is easy and safe.

Control system uses a computer + MITSUBISHI PLC , a computer operating environment is not achievable PLC offline work

Three-channel temperature curve test system, Windows XP operating system, a flexible and powerful testing curve dynamic curve analysis functions.

Model	W-F835-LF-C
Machine specification
Heating zone	Top8/ Bottom8
Heating zone length	3000mm
Heating type	All hot air
Cooling zone	2
Transport part
Mesh width(option)	300\400mm(option)
Conveyor Direction	L-R(R-L)(Option)
Height of conveyor	880±20mm
Transport system	Mesh + Rail chain (Option)
Conveyor speed	200-1800mm/min
Control part
Power supply	3 Phase 5 Wores (220V 50/60Hz)
Power of start up	26Kw
Power of consumption of operation	Approx 5Kw
Warm-up time	About 20 min
Range of temperature control	Room Temper ature-320°C
Temperature control	PID &SSR
Temperature control	PC(LENOVO)+PLC(MITSUBISHI)
Precision of temperature control	±1°C
Temperature distributing error	±2-3°C
Cooling Method	Front Rail Fixed (Option: Rear Rail Fixed)

Board Dropped Alarm	Tower Light:Yellow Warming;Green-Normal;Red-Abnormal
Abnormal Alarm	Temperature abnormity
Dimension
Dimension(mm)L×W×H	L4000×W650×H1400mm
Approx Weight	Approx500Kg