Leadshine Microstep Driver MA860H Free ShipStepper Motor Driver

leadshine MA860H stepper drive, 1.High performance, cost-effective, 2.Supply voltage up to +72VDC/72V AC - details see: https://www.machineto.com/leadshine-microstep-driver-ma860h-free-shipstepper-motor-driver-10234572

Place of Origin:GUA,Guangdong China (Mainland)	Brand Name:Leadshine	Model Number:MA860H	Motor Type:AC or DC
name:leadshine	Supply voltage:up to +72VDC or 72V AC	Output current:up to 7.2A	GND:Power Ground
A+, A-:Motor Phase A	B+, B-:Motor Phase B

Leadshine Microstep Driver MA860H Free ShipStepper Motor Driver

contact supplier for Leadshine Microstep Driver MA860H Free ShipStepper Motor Driver

leadshine MA860H stepper drive

Features

High performance, cost-effective
Supply voltage up to +72VDC 72VAC
Output current up to 7.2A
Self-adjustment technology
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Suitable for 2-phase and 4-phase motors
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current and short-circuit protection

Introduction

The MA860H is a high performance microstepping Drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the Drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Specifications

Parameters	MA860H
Parameters	Min	Typical	Max	Unit
Output current	1.8	-	7.2 (5.1 RMS)	A
Supply voltage	+24	+68	+80	VDC/VAC
Logic signal current	7	10	16	mA
Pulse input frequency	0	-	300	KHz
Isolation resistance	500			MΩ