Home  >  Industrial Supplies  >  Motors  >  Stepper Motor

part number M542, Brand leadshine, Type : Stepper driver, Phase 2 phase, Description new original - details see: https://www.machineto.com/leadshine-m542-stepper-driver-2-phase-for-42-57-stepper-motor-10239101

Description:

Place of Origin:	Guangdong China (Mainland)	Brand Name:	Leadshine	Model Number:	M542
Motor Type:	Stepper Motor	+V:	20~50 VDC, Including voltage fluctuation and EMF voltage	A+, A-:	Motor Phase A
B+, B-:	Motor Phase B	GND:	Power Ground	Phase:	two

Introduction:

The M542 V2.0 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Model: 110HS20

• High performance, cost-effective
• Supply voltage up to +50 VDC
• Output current up to 4.2A
• Self-adjustment technology
• Pure-sinusoidal current control technology
• Pulse input frequency up to 300 KHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• 15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Short-voltage, over-voltage, over-current protections