Home  >  Industrial Supplies  >  Laser Equipment Parts

1.High accuracy, 2.Outside detector and convenient to use - details see: https://www.machineto.com/laser-power-meter-10231138

Laser Power Meter

◊ The laser power meter manufactured byCNIis an optoelectronic device.

◊The main principle is to attenuate the energy by colored optical glass and to receive the residual energy by photoelectric cell uniformly.

◊The power meter has been tested for many parameters, such as, linearity, repeatability, uniformity,long termstability and so on.

◊The measurement range of this power meter is from 0.01 milliwatt to 10 watts. Furthermore, the measured wavelengths from 400 nm to 1064 nm, such as 457 nm, 473 nm, 532 nm, 593.5 nm, 635 nm, 660 nm, 671 nm, 808 nm, 980 nm etc.

Fetures

1.High accuracy

2.Outside detector and convenient to use

3.Good linearity

4.Good repeatability and uniformity

♦Desk-top Power Meter

Specifications

Part No.	PM-XXX-100	PM-XXX-500	PM-XXX-3000	PM-XXX-8000
Power Range	≤100 mW	≤500 mW	≤3000 mW	≤8000 mW
Power Uncertainty	±5%
Precision	0.01 mW	0.1 mW	10 mW	10 mW
Meter Head Mode	Si
Photosensitive Size	φ25 mm
Temperature	20±5°C
Meter Head Size	Dia*Length=39*62(mm)		Dia*Length=43*74(mm)	Dia*Length=65*102(mm)
Meter Box Size	Length*Width*Height=86*47*96(mm)
Weight	950 g
Power Supply	AC 85~260 V

♦ Portable Power Meter

Specifications

Part No.	PPM-XXX-100	PPM-XXX-500	PPM-XXX-3000	PPM-XXX-5000
Power Range	≤100 mW	≤500 mW	≤3000 mW	≤5000 mW
Power Uncertainty	±5%
Precision	0.01 mW	0.1 mW	10 mW	10 mW
Meter Head Mode	Si
Photosensitive Size	φ25 mm
Temperature	20±5°C
Meter Head Size	Dial*Length=35*62(mm)		Dial*Length=43*74(mm)	Dial*Length=65*102(mm)
Meter Box Size	Length*Width*Height=145*80*36.5 mm
LED Show Size	50*20 mm
Weight	700 g
Power Supply	9 V battery , 6F22

Notes:

1. Desk-top power meter can be used for 1~3 wavelengths upon your request.

2. Over range using is forbidden

3. The admirable incidence angle of the laser on the surface of the detector is zero.

4. The calibration date of this power meter is written on the qualified cards. It need to be calibrated for every year.

5. The warranty time is one year.