Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Chemical Storage Equipment

Best quality large volume stainless steel transportation Milk Transport Tank in China.LEO is you best choice. - details see: https://www.machineto.com/large-volume-stainless-steel-milk-transport-tank-10283199

large volume stainless steel Milk Transport Tank :

Using best quality SUS stainless steel to make the body of the tanks, Elegant design, stable and durable( services time over 20 yrs) ,And all the radius of the arc of the inner R corners are larger than 30mm.All the corners have been well polished ,easy to clean . Insulation casing is using polyurethane monolith foamed material ,and has excellent warmth-keeping ability ,2 less temperature rise over 24hrs at room temperature .Convenient for transportation and suitable for all kinds of conveyances over tough country road .

1. The exterior of the tank has an long and short diameter proportion of less than 0.65 (other product is 0.7which is no good for the drive safety), which meets the requirement of the hydrokinetics and the drive safety.

2. About the material

Mainly use 304-2B stainless steel plate, inside wall uses 3mm thickness outer wall use 2mm thickness 304 plate, the seal head uses 2.5mm plate.

Separation(compartment) layer are using the patent back to back welding seal heads technique, with a thickness of 3mm.

3.The inside seal heads are using special molding process by one time punching, And using two seal heads back-to-back welding process, to make sure the both side have the big radian transition and smooth surface, no dead angle left, easy to wash.

4. Insulation

Using polyurethane vacuum foaming process to make the tank isolation, which has the perfect warmth keeping ability and keep the temperature within 1 every 8 hrs.

5. Pressure resistant test

All the milk out-let pipe and the cleaning pipe work are tested with the whole parts by air pressure for 24 hrs after welding, to ensure no leakage.(small factory only use water test)

6.Drain pipe work

Each compartment has one separate milk out-let pipe work itself, which has been put in the PU foam(vacuum), to avoid the frozen of the milk in winter, easy to unload, and no odor in summer to ensure the quality of the milk inside.

7. Manhole cover patent design

The manhole has the anti-overflow design, to avoid milk leakage and overflow from there.

8. The breath airway

The airway edge from the plate is no less than 300mm,with the diameter no less than Φ120mm. to avoid the leakage and overflow from there.

9. The CIP cleaning system

It is equipped with the CIP self-rotation ball inside the tank, and CIP couple joint outside to connect to the automatic control CIP system.

More information please contact us