Home  >  Construction Machinery  >  Building Material Machinery  >  Floorboard Making Machinery

Laminate flooring high-speed production line, all-speed motor configuration. - details see: https://www.machineto.com/laminate-flooring-production-line-10077931

Laminate flooring high-speed production line, all-speed motor configuration.

Laminate floor production line

5+5 LT(K)+ DTS

Major equipment on the following:

A. Feeding Rolling Table (front) (GTB.1): Positioning separation, multi-sheet after a separation then a subsequent transportation to the next procedure.

B. Longitudinal Single Rail Machine LT(K)01-10D: A pair of vertical sheet molding, five of the 10 axis preparation,K-type for the single-track double-open-typeProcessing by the motor to change the overall width adjustment, convenient and quick.

C. Longitudinal Brush Dust Machine (SG): In vertical slotted right after brushing the surface of the work piece with ash.

D. Feeding Rolling Table (central) (GTB.2): Vertical processing will be completed sheet into the next process.

E. Automatism Feeding Rack (GT): Right transportation to the plate in the precise location of a single-chip stocks after separation into the next process.

F. Electrical Control System (GT.D): The coordination of the whole production line control.

G. Transverse Double end Milling Machine (DTS15-10D): The two ends of a pair of sheet molding, five of the 10 axis preparation.

.Feeding Rolling Table(front)

.Length: 2400 mm

.Width: 300 mm

.Speed: Can Adjust,50-80 m/min

.Motor Power:1.1 KW

.Weight: 200 KG

.Longitudinal Single Rail Machine LT(K)01-10D

.Working width: 90-200 mm

.Working thickness: 6-20 mm

.Height of working surface of table:1100(Mainframe All Height 1100 mm)

. Rotate speed of cutter shaft: 7000 rpm

. Feeding speed: 50-80 m/min (8mm high-speed processing board based on)

. Motor Power: LT(K)01-10D

Station 1, 2 main spindle motor: 4X8 KW

Stations 3,4,5 milling spindles: 6X5.5 KW

.Feed-in Motor: 5.5 KW

K-type single-track machine

On pressure-assisted electric: 1.1 KW

Adjust the width of motor: 1.1 KW

.Cutting Tool Diameter: Φ220-Φ250XΦ40

Hydraulic Tensioner Tool sets.

. Dust Absorbing Inlet Diameter

Stations 1, 2 , 3 , 4 ,5: Φ120mmX10

Transmission chain dust absorbing: Φ100mm

.Weight: 7500 KG

.Longitudinal Brushing Machine

.Width: 400 mm

.Height: 1100 mm

.Power: 1.1KW

.Weight: 100 KG

.Feeding Rolling Table(central)

.Length: 2400 mm

.Width:300 mm

.Speed: Can Adjust,50-80 m/min

.Motor Power:1.1KW

.Weight: 200 KG

.Automatic Feed Bin

Plates can be stacked up to 150mm, all of photoelectric switch monitoring, the overall control of the programmer to ensure that equipment before and after the normal connections, every 60 minutes action.

.Transverse Double End Milling Machine

.Working length: 400-1500 mm (special configuration working length:300-2500mm)

.Working Width: 60-300 mm

. Working thickness: 6-20 mm

.Height of working surface of table: 950 mm (Mainframe All Height 1100 mm)

.Rotate speed of cutter shaft:6000-7000 rpm

.Feeding Speed: 15-40 m/min

.Motor Power:

Station 1,2,5milling spindles: 6X5.5 KW

Station 3,4milling spindles: 4 X3 KW

Feed-in motor: 3.7 KW

Width adjusting motor: 1.1 KW

.Cutting Tool Diameter: Φ220-Φ250XΦ40

Cutting tools such as compact sets up a hydraulic motor in need of special note.

.Dust absorbing inlet diameter:

Stations 1,2,3,4,5: Φ120mmX10

Transmission chain dust absorbing: Φ100mmX2

.Weight: 7000 KG

. Else

.The left-standard connection, customers can specify. Standard plate production capacity of 1,800,000 square meters.

.High-speed lines need cleaning winds up to 30 meters per second for good. Cutting tools use of hydraulic sets up tight.

.The maximum processing speed is 8.2mm standard plate, is the cutting of thick plate to reduce speed in proportion.

.Some parameters can be discussed under the customer's request after changes.

. Used in voltage: 380V/50HZ. Air pressure atmospheric pressure: 1-4.

. Delivery Time: 60 working days.

Packaging Details: wood packing

Payment Terms: T/T (FOB Shanghai).

Suzhou Hotjin Precision Machinery Co., LTD.