Home  >  Industrial Supplies  >  Machine Oil Purifier

oil filtration: fire-resistant oil, reduce acidity and dehydrate, filtration finess: 0.2acid value: 0.03, some parts import - details see: https://www.machineto.com/ky-fire-resistant-oil-purifier-oil-filtration-purification-equipment-10228312

Oil Filtration Equipment FUNCTION

The machine was developed according to the feature of fire resistant oil, and used the technique such as deacidificaion filter, anti-settlement, coalescence-separation, vacuum drying, fineness filtering, so it can efficiently remove acid value, pigment, water, gas, particulates from oil. The machine is made of materials which are compatible with fire resistant oil, and it has pleasing appearance, easy operatation, low noise, long life. It has solved a series of technical problems such as compatibility, thermal stability, hydrolysis stability, solvent effect, proportion and toxicity etc.

APPLICATION SCOPE & USE

The machine applies for fire assistant oil.

Online maintenance for the fire resistant oil of turbine adjustment system, at the same time fill and discharge oil tank.

Regenerate and purify the law grade oil to reach and maintain the standard for operation.

Also apply to other hydraulic system which takes fire resistant oil as medium.

TECHNIQUE FEATURE

Deduce acidity and dehydrate efficiently;

Equipped with a new efficient regeneration medium and dehydration module which can reduce the acid value and water from fire resistant oil quickly and efficiently, which also can raise the resistivity and resume the physical and chemical property of oil.

Fineness filtration (ß≥200)

Adopt the international advanced filtration unit which can reach the following level be low NAS1638-6 grade after treatment.

Structure is compact, the replacement of filter element is convenient which can be done without any tools, the replacement can be made within 1 minutes.

Equipped with the functions of alarm and shutdown, without humans supervision at site..

KY TECHNIQUE INDEX

ultimate filtration fineness: 0.2μm;

Granularity: NAS 1638 4 grade (MOOG 1 grade).

Physical and chemical requirements for fire resistant oil after filtration:

Viscosity (ASTMD 44572):

37.8(saybolt) 220seconds (47M/S)

98.9(saybolt) 43seconds (5M/S)

Acid value: ≤0.03mgKOH/g;

Max. Water content WT %:< 0.01;

Particle distribution (SAEA60): trial 2 grade;

Max. Chlorine content: 20 ppm;

Max. Chromaticity (ASTM): 1.5;

Hydrolytic stability (48 hours): qualified;

Min. resistant values OHM/cm: 12x109

Max. Foaming (ASTMD 89272) ml: 10;

Coefficient of thermal expansion reaches 100 (38):0.00038;

Volume of air entrainment (ASTMD 3427) min: 1.0;

Min. flash point: 455 (235);

Ingnition: 665 (352);

Spontaneous combustion point: 1100 (594);

Proportion60 (16) Kg/L: 1.142.

Applicable environmental condition

Installation condition: indoor;

Filtration oil name: fire resistant oil (Reolube);

Height above sea level: 2000m

Earthquake shatter degree: VI

Weather condition

Max. Applicable temperature: 50

Min. applicable temperature:-20

Mix. Relative humidity: 85%