Home  >  Raw Material Processing Machinery  >  Plastic Raw Material Machinery  >  Plastic Mixer

1.formulating, mixing dying of mealie and farin, 2.heat and cold mixing process, 3.100% automatically - details see: https://www.machineto.com/krl-2x300-1000-high-speed-mixing-machine-10338246

KRL-2X300/1000 high-speed mixing machine is mainly used for such processes as the formulating, mixing dying of corn and farina, and the drying, sealing odd of engineering plastics like ABS Merlon prior molding and processing, it is also applicable for the mixing of Arcolite.

This assembly integrates heat mixing process and cold mixing process together, the powder materials after heat mixing will automatically enter could mixing to be cooled,it exhaust remaining gas and prevents caking. It is an efficient and ideal equipment for the formulating, mixing and drying of farina degrading materials.
Specification:

A, Cold mixing:

1	Total volume	1000L
2	Rotating speed of primary axis	100 r/min
3	Cooling time	10-15 minutes
4	Temperature of cooling materials	40-60°C
5	Cooling mode	water cooling
6	Cooling media	tap water
7	Pressure of cooling media	0.1Mpa
8	Temperature of cooling water	0-15°C
9	Electric motor	Y180L-6 15KW
10	Standing electric-control box	1PC
11	Working gas supply	compressed air 0.65-0.8Mpa
12	Working power supply	AC 380V 50Hz, 3 phase, 4 wire
13	Contour size electric-control box	2050mmx250mmx2850mm

B, Heat mixing:

1	Total volume	300L X 2
2	Effective volume	225L
3	Total stirring rods	3 for each set
4	Rotating speed of stirring rod	970 r/min
5	Heating mode	electric heating 12W, special mechanic oil with burning point above 700°C
6	Mixing time	5-35 min/pot
7	Electric motor	AC motor 55kw Frequency Conversion Control
8	Rotating speed	980r/min (individually)
9	Voltage	380V 50Hz 3 phase 4

SGS CERTIFICATION