Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drum Drying Equipment

Rotary dryer:, Drying wood chip, sawdust, ore, sand, Big capacity, simple maintenance, long life - details see: https://www.machineto.com/italy-stainless-steel-rotary-dryer-for-raw-materials-for-delivery-10287149

Description of Italy rotary dryer:

Application of rotary drum dryer Rotary drum dryer or drum dryer machine is widely used in building material ,chemical industry ,cement industry to dry the slag ,limestone,coal powder ,clay ,etc. Rotary dryer can also be used for drying the wet concentrate in the beneficiation plant, such as iron concentrate, copper concentrate, and others.

Working principle of small drier machine:

the wet material is taken to the hopper by belt conveyor or bucket elevator, and then into feed opening through feed pipe with the help of feeder. The slope of the feed pipe shall be higher than the material’s dip angle to make the material flowing into the dryer drum. The dryer drum is a rotary drum and there is a slight slope between the drum and the horizontal line. The material is fed through the higher end, and the heat carrier goes from the lower end, which forms an upstream contact with the wet material. During the movement in the drum, the material gets the heating directly or indirectly, and then is dried. Later the dried material is transferred by the belt conveyor or spiral conveyer at the discharging opening. There are lifting boards on the inside wall, which lifts and scatters the material to make the contact surface bigger between the material and the heat carrier. This can promote the drying rate and push the material forward. Heat carrier is usually hot air or flue gas. After go through the dryer, the substances containing in the heat carrier usually need to be collected by cyclone dust collector. If the air dust content need to be reduced further, bag filter or wet dust remover shall be used.

View of small drum dryer for reference:

rotary dryer is lifting into the container which is going to be delivered to Italy:

Appearance of dry machine has been delivered to the container:

rotary drying equipment is delivered to Italy:

Main technical parameters:

Model (mm)	Inclination (%)	Rotate speed (r/min)	Air inlet temperature (°C)	Power (kw)	Production capacity(t/h)	Weight (t)
Φ600x6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800x8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800x10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000x10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200x10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200x12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500x12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800x12000	3-5	2-6	≤800	18	5-12	25
Φ2200x12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200x18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ2200x20000	3-5	1.5-6	≤800	30	12-20	56
Φ2400x20000	3-5	1.5-5	≤800	37	18-30	60
Φ3000x20000	3-5	1.5-5	≤800	55	25-35	78
Φ3000x25000	3-5	1.5-5	≤800	75	32-40	104.9