Home  >  Printing Machinery  >  Pre-Press Equipment

Isostatic Presses use a pressure vessel chamber to compact a powder or material placed in a sealed tooling. - details see: https://www.machineto.com/isostatic-press-10072443

1 Technical Parameters

No.	Item	Unit	Value
1	Ambient temperature	°C	0-40
2	Installation site		Indoor
3	Working medium of pressure vessel		Transformer oil
4	Useful diameter of pressure vessel	mm	400
5	Useful depth of pressure vessel	mm	500
6	Max. working pressure	MPa	300
7	Max. working pressure of hydraulic station	MPa	31.5
8	Hydraulic medium		No.46 antiwear hydraulic oil (in summer) No.32 antiwear hydraulic oil (in winter)
9	Max. working temperature of hydraulic oil	°C	≤55
10	Power	KW	23.5
11	The colour of equipment		Blue
12	Weight of complete machine	t	13.6
13	Overall dimensions of main body length × width × height	mm	1600 × 1100 × 3200
14	Floor space(including hydraulic station) length × width	mm	2800×1600

2 Main parts and technical requirements

2.1 Equipment should include following elements.

Pressure vessel and framework

Hydraulic system

Cooling system

Control system

2.2 Pressure vessel and framework

2.2.1 Pressure vessel and pressurization vessel are all wound by Prestressed steel wires.

2.2.2 Framework is wound by prestressed steel wires.

2.2.3 The seal of pressure vessel should be secure and reliable.

2.3.1 Adopt the high pressure pump produced by Shanghai High Pressure Hydraulic Pump Factory CO., LTD., complete machine is specially manufactured by KOMPASS Kang-hydranlic chaotian (China) co., Ltd. with excellent technologies and reliable quality.

2.3.2 Adopt the pressurization oil cylinder with high efficiency and low fault rate, and don’t expose high pressure pipeline.

2.3.3 Working medium and drive medium are isolated

2.3.4 Complement working medium to pressure vessel automatically.

2.4 Cooling system

2.4.1 Adopt the water cooling plant to cool down hydraulic oil medium.

2.4.2 If the equipment needs produce continuously, please prepare circulating cooling water.

2.5 Control system

No.	Control function	definition
1	CONTROL INTERFACE
	Touch screen + Membrane switch	Display, Set, Operate
	Buttons	Function keys
2	Pressurization
	Time	If the vessel is empty, pressurization from 0 to 300Mpa needs 180s about.
3	Holding pressure
	Target Pressure Value	Adjustable
	Holding pressure time	Adjustable
4	Depressurization
	Depressurization speed is continuously adjustable	Manually adjust depressurization speed through throttle rod.
5	DATA
	Technological parameters	Be stored
6	EMERGENCY OPERATION
	Emergency Stop	Yes

2.6 Product structure and appearance requirements

2.6.1 All parts of air channel, oil way, waterway components should be sealed reliably. Seal components are not easy to be tacky and be deformed under moist heat condition, aging under high temperature and hardened under low temperature.

2.6.2 All parts of air channel, oil way, waterway components should be not lose seal capability and easy to be replaced.

2.6.3 The smeared coating of appearance should be smooth and glossy and the colour is symmetrical.

2.6.4 Security and environmental protection requirement should meet the related regulations and standards of the State.

2.7 Design and manufacture standards of equipment

Design, manufacture and safety of equipment conform to standards of international industry and related field.