Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Forging Machinery

Input voltage: 3 phases, 380V-440V, Output frequency:1-20Khz, Applied for heating rod's diameter from 12 to 30mm - details see: https://www.machineto.com/iron-steel-rods-heating-forging-machine-igbt-induction-heating-machine-with-a-forging-furnace-10164886

ZG-MFF35/45 Rod heating Furnace
Main Specifications
1. Main structure:
(1) ZG-MFF35/45 M.F. Generator
(2) Compensate cap and Working Table
(3) Induction coil and SS tube, etc.
(4) Pneumatic rod feeder
2. Maximum input power:35KW/45KW
3. Output oscillating frequency:1—20KHZ
4. Input: 3P 380V,50 or 60HZ
5. Cooling water desire:0.2MPa, ≥10L/Min
6. Table size: L1.2m×W0.6m×H0.68m
7. Weight: 123KG/135KG
8. Heating ability(KG/min)
(1) Heating steel to 1050°C: 1.25KG/1.67KG
(2) Heating brass to 700°C:1.75KG/2.33KG

Main applications
These models can be used to heat rod of steel, stainless steel, copper, brass or aluminium with diameter from Φ12 to 30mm in the shaping of screws , nuts, valves, locks and other metal parts.

Advantages and characteristics
1. The coil is usually 500mm or 600mm long, and there are five to ten pieces of metal bars inside the coil to be heated. Coil size is depended on the rod diameter, and coils can be easily changed.
2. The output oscillating frequency is about 10KHZ when heating rods from diameter Φ12 to 30mm, penetrating heating is maintained, at the same time, high heating efficiency can be achieved.
3. Pneumatic rod feeding system is applied, and to certain rod, only the heating power and the feeding speed are adjusted to send the red rod out continuously by step. It is very convenient to operate.
4. With the small size and tight structure, the Rod heating furnace can be put besides the press machine to ease the operation.