Home  >  Food & Beverage Processing Machinery  >  Food & Beverage Machinery  >  Fruit & Vegetable Processing Machines

food dehydrator, 1.high hot air efficiency, 2.low noisy, 3.stainless steel,clean.healthy - details see: https://www.machineto.com/industrial-commercial-fruit-food-dehydrator-10036996

industrial commercial fruit food dehydrator

Application of dehydrator machine for vegetables

This dehydration machinecan be used both for drying round, oval fruits and vegetables .it is suitable for carrot, garlic, ginger, potato, cabbage, red / green bell pepper, spinach, tomato, parsley, mushroom, onion and green onion etc.

Explanation of Industrial dehydrator

1.for heating source, there are many kinds: steam, electrical, far infrared or steam, and electrical to be choose.

Steam heating source ---user needs to prepare a boiler

Gas heating source ---- user needs to prepare gas hot air furnace

2. Temperature to be used: steam heating 50-140°C, Max,150°C

3. using electricity, the temperature will be 40-350°C

4. the dryer has automatic control system and computer control system for user’s selection.

5. It can be made of stainlesss steel both inside or outside. Or stainless steel inside and carbon steel outside.

6. Stainless steel drying plate with plate size is 640x460x45mm

7. The material of heat preservation: fiberglass cotton w/thickness 80mm

8. Stainless steel drying car

9. digital display: 1 set

10 . Commonly used steam pressure 0.02-0.8mpa (0.2-8kg/cm2)

Features of industrial dehydrator machine :

1. The machine adopts principle of crushing materials by stab roller, crushing material through high speed centrifuge and extruding way to take off the moisture fo the materials.

2.It is widely used in food industry of high moisture content of fruit products smash dehydration,juicer,such as wax gourd,pumpkin,carrort.

3. Stainless steel stab roller is safe ,sanitary and resistant.it can efficiently avoid the corrosion degree to the mechanical components by products juice.

4.Instead of traditional brush structure, dehydration rotor adopts new structure to eliminate the shed wool phenomenon caused by the material contamination and safety problems.

5.Stainless steel screen cloth extend the service life of the mesh, and greatly reduce the maintenance cost.the mesh is easy to dismounting, thus improve the work efficiency.

Drying machine Parameter :

Model specifications	HX-I	HX-II	HX-III
Amount of each dry	120kg	240kg	360kg
Power	9kw	15kw	36kw
Consumption of steam	20kg/h	45kg/h	70kg/h
Thermal area	20m2	40m2	80m2
Air volume	3450m3/h	6900m3/h	10350m3/h
Temperature	±2°C	±2°C	±2°C
Wear plate bake	48	96	144
Package Size	2350×1200×2000mm	2350×2200×2000mm	3310×2200×2000mm
Bakematching vehicles	2	4	6

Working principle

The heat radiation and heat convection heat the air in the drying chamber after the air being exchanged by the heat exchanger. The hot air is diffused in the whole drying chamber and carry out sufficient heat exchange with materials under the function of fan. The vapor is removed from the drying chamber under the humidity removing fan.

The packing picture:

The photos of the factory:

The contact information: