Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Industrial Chiller

Industrial Air Cooled Chiller, 1.Cooling Capacity(KW):60, 2.Water Flow(m3/h):13.5, 3.Air Volume(m3/h): 25000 - details see: https://www.machineto.com/industrial-air-cooled-chiller-10243489

Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries, including plastic injection and blow molding industry. The industrial chillers assist to improve the production efficiency and minimize the rejection ratio of finished products. A chiller will use either a vapor compression or absorption cycle to cool.

Chillers can be either air-cooled or water-cooled.

Air-cooled chiller requires less maintenance than water-cooled unit and it dispenses with the need for cooling towers. However, the air-cooled chiller generally consumes approximately 10% more power than a water-cooled unit. It transfers the heat absorbed to surrounding air directly.

Water-cooled chiller absorbs heat from process water and transfers it to a separate water source such as a cooling tower, river or pond. A cooling tower is a must if there is no direct discharge source like river or pond. The water could be reused after special treatment to remove the dusts and impurities.

There are 10kw-200kw cooling capacity for you choosing. Please kindly contact us for you detail request.
Features:
1.cooling temperature range 5-35 centigrade temperature.
2. High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition. The heat exchange power is: 15KW
3.Tube-fin double condensers with excellent heat transfer and rapid cooling. The efficiency of condensers is 17.5KW
4. Stainless steel warm-keeping water tank.
5. Overload protection for compressor, pump and blower.
6. Warm-keeping design for all piping to avoid partial convection.
7. Independent temperature controller, anti-freeze protection.
8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.

Name	Industrial Air Cooled Chiller
Model	RO-25A
Cooling Capacity (Kcal/h)	61683
Pump Power	2.2KW
The Cold Water Flow(m3/h)	12.34-14.44
The Cooling Air Volume( m3/h)	25000
Refrigerant	R22/R407C
The Water Tank(m3)	0.405
Temp Control Scope(°C)	5- Normal atmospheric temperature
Compressor Input Power(KW)	6*3
The water pipe size of receipts and payment(G")	2"
Power Supply	3N/415V/50HZ
Dimension(L*W*H)mm	2080*1000*2055
Weight(KG)	790
Configuration: 1.Compressor:Japan Sanyo 2.Taiwan Punp electronic board of micro computer 3.Pump: Tanwan Mini
Protective Device: 1.Phase protector 2.Fan overload protector 3.High/low voltage protector 4.Water level protector 5.Anti-freeze protector