Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Forging Machinery

induction heater 160KW:, 1.rod forging, 2.IGBT Induction Heater for partial heating of bolt, 3.high frequency induction heater. - details see: https://www.machineto.com/induction-heater-160kw-10165251

induction heater

Model:SF-160AB

Main specifications:

Maximum output power: 160KW

Frequency: 8-30KHz

Maximum input current: 280A

Input voltage: 380VAC 3phases, 50 or 60Hz

Duty cycle: 100%

Cooling water: 0.1Mpa 68L/min

Auto heating time: 0.1-99.9seconds

Auto retaining time: 0.1-99.9seconds

Auto cooling time: 0.1-99.9seconds

Weight and dimension:

Model	Net weight(KG)	Size: L x W x H (mm)	Packing weight	Pacing size: L x W x H (mm)
SF-160AB generator	172KG	930x550x1190mm	292KG	1130x1120x1300mm
SF-160AB transformer	125KG	630x470x550mm

Main characteristics:

1.IGBT inversion technology based LC series circuit .

2.phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.

3.diode rectifier cause high power factor more than 0.95

4.working continuously with 100% duty cycle, power can be instantly turned on or shut off.

5.perfect protective circuit and cooling system design, which ensure the good reliability of machine.

6.low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy saving 15%-30% compared with SCR induction heating machine.

7.environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating smoke, waste heat, noxious emissions and loud noise.

8.operating and installation easily and safely

9.can subsititue traditional heating methods.

Application:

Rod forging

bolt,nut forging

heat treatment of shaft, gear, pin, etc.

shrink-fitting

annealing of pipe welding

etc.