Induced draft counter flow cooling tower 150ton

cooling tower 150ton, 1.space saving, 2.electricity saving, 3.good corrosion resistance, 4.easy maintenance - details see: https://www.machineto.com/induced-draft-counter-flow-cooling-tower-150ton-10240501

Condition:New	Cooling Type:Counter Flow	Material:FRP	Place of Origin:Shandong China (Mainland)
Brand Name:Lanxiang	Voltage:380V	Power(W):7500	Dimension(LWH):dia4342mmxH3835mm
Certification:ISO9001	Fan type:Axial	Motor Type:Total enclosed	Drift Loss:0.001%
Framework:hot dip glavanized steel	Casing:FRP

1) Good shape with small outside size, light weight

2) Optimum structure

3) The cooling tower body is made of FRP, which is anti-aging, anti-corrosion, without fading and distortion

4) Min. Noise: The lowest noise blower and unique noise elimination technology is adopted to reduce the noise to a minimum level

5) With reliable operation: All steel structure brackets are galvanized and corrosion resistant. The usage life is twice longer compared with similar products

6) Simple operation and maintenance: CTNC intelligent control system is adopted to realize labor free management

7) The angles of all the fans are regulative and axial-flow, which are made of advanced engineering plastics.

8) All the motors are sealed, which can be used in the severe weather and circumstances.

9) The casing and water plate of the cooling tower are made of fiberglass, which will not be corroded, and no painting is needed. They can be used for a long time with very low maintenance cost.

Technical Parameters

Item: Induced draft counter flow cooling tower with fill
Technical No.		Date:

Design and operating conditions	Cooling tower type		Round type, steel framework, FRP casing, counter flow tower
	Entering Fluid Temp		t1 =36°C
	Leaving Fluid Temp		t2 = 28°C
	Design wet bulb temperature		τ= 25.6°C
	Atmospheric pressure		P = 100 KPa
	Flow		150ton
	Dimensions		φ4342mm×H3835mm
	Weight / running weight		3300kg/5592kg
Power system	Fan form / material		Axial / aluminum alloy
	Fan diameter / number of blades		2800mm/4blades/1set
	Motor power - Number of poles		7.5kw-6p//1set
	power		380V/3phase
	Motor protection / insulation class		IP55/F
	Transmission		Directly connected to the transmission
Water distribution system	water distributor mode		Tube water distribution
	Nozzle characteristics		Large caliber, inactive, very low water pressure can be realized conical water distribution
	Nozzle Material		modified PVC
	Fill specifications / material		S-wave / PVC
	Fill characteristics		0.40mmthick, high efficiency,flame retardant
	Drift loss		0.001%
Pipe diameter	Inlet pipe diameter × number		DN200×1
	outlet pipe diameter × number		DN250×1
	Overflow / drain pipe diameter × number		DN50×1
	Make-up diameter × number		DN32×1
Structure	Framework		Carbon steel Galvanized
	Cold water basin / Distribution basin		FRP
	Casing		FRP
	Fastener		Stainless steel 304
Note: This parameter is based on specific conditions. Any difference of the conditions, pls contact with us.

If you are interested in the round cooling tower, please provide the following parameters: the cooling water entering and leaving tower water temperature, wet bulb temperature, we shall provide you the most competitive prices. Looking forward to our cooperation!

We will attend FEBRAVA 2013.Welcome to our booth!

FEBRAVA 2013 - International Refrigeration, Air Conditioning, Ventilation, Heating and Air Treatment Fair 18th Edition

Booth No.: B135 & B137

Location: Exhibition Centre Immigrants, Sao Paulo, Brazil

Date: 17th to 20th September, 2013

Packaging Detail:wooden package or as per requirement

Delivery Detail:30days after receiving deposit