Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Punching Machines

Hydraulic Wire Rope Press Machine Manufacturer, Wire rope splicing machine, Wire pressed machine - details see: https://www.machineto.com/hydraulic-wire-rope-press-machine-manufacturer-10133204

Hydraulic Wire Rope Pressed Machine Features:

• Control of the hydraulic units
• Machine control
• Electrical auxiliary drives for the hydraulic pumps
• Loading and unloading systems
• Sensor technology for the measurement of position, pressure or velocity• A dial on the machines sets the sleeve size which automatically determines the hydraulic pressure required for
• swaging the sleeve, eliminating the possibility of under or over swaging.
• The "Auto" switch allows swaging of sleeves automatically with the push of a button. In this mode, the dies will
  lose and open automatically to pre-fixed settings. This is ideal for swaging aluminum ferrules.
• The “Auto Return” switch allows the dies to move up when pressing the “UP” foot pedal and moves down
  automatically when released. This permits faster and more efficient swaging of carbon steel sleeves.
• The distance between the die openings can be manually adjusted, reducing the waiting time for the dies to fully
  open or close.
• There is an emergency shut off switch.
• The swager can be operated by foot or by hand.
• The dies are fixed in place and move vertically.
• The dies are fully accessible in two-column frame design which allows a generous amount of room for large slings.

Parameter

o.	Model Number	Max Press Capacity ( Ton )	Wire Diameter (mm)	Volt (V)	Frequency (Hz)	Piston press speed	Piston return speed	Machine Weight (KG)	Size L*W*H (mm)
1	LTYTJ350	350	6-32	380	50	4.8mm/sec	25.1mm/sec	2200	1550*600*1620
2	LTYTJ500	500	6-36	380	50	3.6mm/sec	22mm/sec	3200	1680*620*1720
3	LTYTJ800	800	6-48	380	50	3.6mm/sec	22mm/sec	4800	1820*850*1970
4	LTYTJ1000	1000	6-52	380	50	3.0mm/sec	20mm/sec	7600	2080*1130*2180
5	LTYTJ1200	1200	6-56	380	50	2.8mm/sec	18mm/sec	8000	2180*1140*2350
6	LTYTJ2000	2000	6-78	380	50	0.4mm/sec	3.2mm/sec	16000	2480*1150*2710
7	LTYTJ3000	3000	6-96	380	50	0.3mm/sec	2.0mm/sec	24000	2780*1560*3270

Traditonal Hand Wire Splice

This photo was taken around 1980 in a specialist ship´s rigging workshop, The heavy steel cable was intended to anchor oil tankers in Reykjavik harbour and I accomplished the splice in 45 minutes.

Advantages

• Uniform automation systems
  from the control of the hydraulic units through to the electrical drive technology for the transfer

• High process quality
  thanks to the closed-loop control for position and pressure

• Exact pressing forces
  in the individual axes

• Increase in energy efficiency

  through the use of hydraulic pumps

RELATIVITY TABLE FOR DIE,ALUMINIUM FERRULES AND WIRE ROPE

Our Factory and Workshop