Hydraulic tools

Facebook Twitter LinkedIn Google Google+

Hydraulic tools

One of the efficient, safest and easiest ways of mining, quarring, demolition & removing mass and reinforced concrete.

Holes are drilled in the granite, marble, natural stone, rock & concrete structure and the splitter head, which contains a counter wedges & center wedge, is inserted. Hydraulic pressure is provided by a motor, powered by electricity, diesel or petrol.

The build up of lateral forces against the inside of the holes induces cracks in the natural sonte, rock & concrete.

The cracking follows the plane of weakness created by the holes that were drilled previously.

The process is repeated until the whole structure is fractured into smaller sections and ready for removal.

Air and gas tools is favoured in instances where vibration, dust and noise must be limited due to other surrounding working environments (offices, workshop, Hospitals etc), and is more effective than hand held pneumatic tools.

Advantage of Hydraulic tools

1. Enormous splitting force up to 500 tons
2. Dust free and near silent operation
3. Vibration free
4. Light weight
5. Precision work
6. Always controllable
7. For use in close quarters and hard to access places
8. Easy handling
9. Different size counter wedge and center wedge can use on the same splitter

Typical Applications:

1. All kinds of natural stones, rock, granite, marble mining & quarrying
2. Machine bases
3. Bridge columns
4. Reinforced concrete structures
5. Mass foundations
6. Controlled demolition of pillars, concrete and walls where heavy equipment is impractical
7. Staircase removal
8. Premises that may be in continual use such as hospitals, factories, offices and hotels
9. removing redundant reinforced concrete structures, concrete machine beds and plinths, mass filled concrete etc.
10. Underwater demolition
11. Demolition in a restricted space
12. Tunnel work
13. Trench excavation
    Technical parameter of Hydraulic Splitting Cylinder

    Model	Drill Hole Diameter	Mini Drill Depth	Splitting width	Splitting time	Splitting power	weight
    DT32A	32-35mm	≥270mm	10-30mm	5-12s	358T	20kg
    DT32B	32-35mm	≥300mm	10-30mm	5-12s	358T	21kg
    DT35A	35-38mm	≥300mm	10-35mm	5-12s	420T	22kg
    DT35B	35-38mm	≥400mm	10-35mm	5-12s	420T	25kg
    DT38A	38-42mm	≥350mm	10-38mm	5-12s	480T	25kg
    DT38B	38-42mm	≥450mm	10-38mm	5-12s	480T	28kg
    DT40A	40-45mm	≥400mm	10-40mm	5-12s	500T	32kg
    DT40B	40-45mm	≥500mm	10-40mm	5-12s	500T	35kg