Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Spreader

1.wireless remote control., 2.manufacturer of hoisting and concrete machinery with 10-year experence., 3.with BV certificate. - details see: https://www.machineto.com/hydraulic-stationary-concrete-pump-placing-boom-hg38-10093970

Introduction:

HG Series concrete placing boom is a new product that researched and developed to expand the concrete placing area, and to increase the mechanization level of pumping transfering in construction. It is the necessary auxiliary equipment for pump transferring in construction field. To use placing boom as the associated equipment for construction can largely increase the concrete placing area, enlarge the working area of the concrete pump and increase its working efficiency, save labors, lighten the working strength, shorten the construction period, reduce associated piping, bring the construction firms and our society with enormous benefits.

Advantages are as follows:

1)The placing boom has a R-shaped boom assembly with three foldable sections, which can swing through 360 degrees while luffing, folding, unfolding, thus allowing it to place concrete to form walls, pipes, columns, piles and other vertical structures without confined placement areas.

2)The boom assembly’s luffing, folding/unfolding and swinging are carried out hydraulically with buttons. The hydraulic and electrical system feature overload protectors, flow controls, alarms, phase sequence protectors and so on, which ensures the placing boom to have reliable performance, easy and smooth operation, and high safety.

3)Featuring compact structure and lightweight, the placing boom can be completely lifted and transferred to any suitable places for concrete placement, such as floors, platforms, simply-structured racks or even trailers. It does not need to be fixed while working. In addition, it can be lifted off the placement sites when it is not needed, which leads to no disturbance to other jobs and easy maintenance.

Main technical parameters of concrete placing boom HG38

concrete placing boom
Model		HG38
Delivery pipe dimension (outside diameter × thickness) (mm × mm)		Φ133×4
Delivery hose dimension (inside diameter × length) (″×mm)		5″×3000
Radius of placing boom (m)		38
Stationary height (m)		47.3
Max. attached height (m)		151
Three hydraulic foldable arms	1st section	20.8m
	2nd section	9.2m
	3rd section	8.0m
	4th section	/
Boom articulation	1st section	-4.2°~+82.5°
	2nd section	0°~180°
	3rd section	0°~180°
	4th section	/
Slewing range (°)		360
Power of motor (kW)		15
Pressure of hydraulic system (MPa)		31.5
Type of hydraulic oil		ESSO NUTO H46
Interval of climbing frame (m)	Climbing	3.0~4.2
	Placing concrete	6.0~8.4
	Resting
Mode of operation		1. cable remote control
		2. radio remote control
Power		380V/50Hz
wind speed	Placing concrete	≤60 km/h
	Climbing	≤28 km/h
working temperature		0~48°C

Selling points:

1.The hydraulic system of HG series concrete placing boom can realize 360° slewing; the balance valve and solenoid directional control valve are relatively imported from Italian Oil control and Germany Rexroth.

2.Main components if HG series concrete placing boom are imported from world famous companies such as Japan Omron and France Schneider.

3.Both wired and wireless remote control is available.

4.The slewing mechanism is normally closed type, that means slewing brake is always closed in general working conditions except that the slewing motor is connected with oil, the whole vehicle can not slew, the placing boom is fixed to avoid collision.

5.Low cost: the delivery bend pipes are accurately bend-cast, thus even the wearing of the pipes and prolong its service life.