Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Pile Driver

1.pile driver pressure:180tons, 2.square&circle pile:250 to 400mm, 3.side and cornor pile included, 4.high pile driving speed - details see: https://www.machineto.com/hydraulic-static-pile-driver-zyc180b-b-10113157

Main Introduction for Hydraulic Static Pile Driver:

1.The working principle is using hydraulic pressure to clamp precasted pile, H shape or other shape steel pile, driving the pile into ground by hydraulic pressing.
2. Suitable for piling precasted round & square concrete pile, H shape steel pile and other irregular shaped pile in clay, soft soil and sandy ground.
3. It has characteristics of no noise, no vibration, no pollution, clear ground with high speed of pile driving, reliable construction quality and environmental protection, high efficiency, energy saving.

"New Timehope" brand Hydraulic Static Pile Drivers are self-developed with 5 up-to-date national patents:

1. Flexible connection technology
Novel flexible connection technology of central axis, won national practical patent No. 200820158613.8.

2. Multi-functional piling technology
Original combination clamping piling and top piling won invention patent No. ZL02139875.5.

3. Inverted cylinders technology
Structure design of inverted cylinder changes strained condition of cylinder and increases the service life of cylinder,

wonnational practical patent No. ZL01249443.7.

4. Integrative side and corner piling technology
Particular side and corner piling mechanism increasing the capability of side & corner piling, won national practical patent No. 200820158615.7.

5. Self-adaptive clamping mechanism
Original self-adaptive clamping mechanism won national practical patent No. 200820158614.2.

Unique features of "New Timehope" hydraulic static pile driver:

1. The supporting points of derricking cylinders are set at the two sides of crane arm. Increasing the stability and safety of crane arm

2. Lengthen the first arm of crane and increase the stability and safety of the crane.

3. Hydraulic systems for crane and piling mechanism are interflow, the crane pump can be used for pile driving while the crane is not working, which speed up driving pile speed.

4.Hydraulic systems of crane applies speed adjusting system that speed of each component can be adjusted freely during operation. Safe, stable and reliable.

5. A shutoff valve is assembled at high press tube of the leg cylinders and pile driving cylinders. Turn off the valve before knocking down, and then disassemble the connecter to avoid the waste of hydraulic oil and save pile machine moving and reparation cost for customer.

6. Using high pressing plastic pipe to replace steel pipe for the hydraulic tube. The bearing force is larger than the steel pipe and the cost is 3 times higher. It is convenient to repair and maintain by using plastic pipe with high reliability.

7. Piling and clamping hydraulic control system applies remote control system, which greatly improves the positioning precision and clamping reliability of the pile, effectively avoid the damages to the pile in construction due to pile clamping force overlarge and un adjustable .

8. Weight beam is one-piece plate bending forming, not allowed to be welded, which assures its strength.

9. Motor system is changed from past horizontal type to vertical type. Oil pumps are easily repaired. The system is easily ventilated and cooled.

10.The central axis and short boat are connected by a floating and flexible connection mechanism (two layer boards are used underside of the central axis). Effectively improved the stress condition of central axis and machine body. Easily assembled and disassembled. Central axis, rotary platform and short boat are of two layers structure and connected with the main body.

Main Technical Parameters for ZYC180B-B Hydraulic Static Pile Driver

Rated piling pressure (tf)	180	suitable piles & specifications (mm)		Square: 250-350 Round: 300-400
Max. Piling speed (m/min)	7.8	Max. Crane lifting weight (t)		8
Piling stroke (m)	1.6	Hanging pile length (m)		12
Max. Longitudinal pace (m)	2.4	Minimum side piling space (mm)		600
Max. Transverse pace (m)	0.5	Minimum corner piling space (mm)		1300
Max. Rise stroke (m)	1.0	Rated hydraulic system pressure (mpa)		22.4(16)
Angle range (°)	15°	Total weight (t)	Machine weight	80±2
Intensity of pressure (tf/m²)	8.18/12.0		Counter weight	98
Hydraulic Pump (Unit × Ml/Turn)	2×63 + 1×63		Total weight≥	180
Motor power (Unit × kw)	2×22 + 1×22

Above are standard technical parameters, machines are able to be redesigned according to customers' requests.

After-sales Service and Warranty Hydraulic Static Pile Driver: