Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Lift Tables

Hydraulic lift table/hydraulic scissor lift platform, 1)Customizable, 2)Control:electric control, remote control - details see: https://www.machineto.com/hydraulic-lift-table-hydraulic-scissor-lift-platform-10197710

Lift table/heavy duty lifting equipment/hydraulic scissor lifts

Two Types

1) One is to be installed on ground to load cargo and then lifts till a certain height for unloading the cargo.
2) The other is installed in a lift pit. Then platform table is at the same level with the ground which is convenient to load the cargo onto it. In this way it also can be called freight elevator.

Parts Introduction

1)Platform table: anti-slip checkered steel plate
2)Scissor structure: Manganese steel rectangular tube

4)Control equipment : Delixi, Siemens or Schneider brand.

5)Pump station: Italy Hydrappp or Sino-italian brand.

6)Hydro cylinder:high precision wear-resisting hydraulic cylinder with locking device for fall protection.

7)Obturating ring: Brand German Seal (made in German) or Japan VLQU Seal

Control
1) Electrical up-down control device, or manual control when the electricity Is not available.We can also install the remote control device according to your requirement.
2) The remote control and multi-control points at the different floors could be realized at each control point. Lift up, Stop and Lower down can be realized at each control point.The lift platform could stop at the accurate loaction point

Safety

1) In special circumstance, the machine will use explosion-proof electric equipment.
2) The work table can be equipped the guardrail to guarantee safety.
3) The lift can be installed hydraulic overload protective device.

4)Spillover valve: It can prevent high pressure when the machine moves up, to adjust the pressure.

5)Emergency decline valve: it can go down when you meet an emergency or the power off.

6)The machine is equipped single control solenoid valves to prevent the platform dropping if power failure.

Specifications

(The following specifications are only for your reference. We also customize it according to your demand)

Model	Table size	Capacity	Net lifting height	Min height	Total dimension
SJG1-1.5	1200*1200mm	1T	1.5m	560mm	1200*1200*560mm
SJG0.3-2.9	1400*750mm	0.3T	2.9m	710mm	1400*750*710mm
SJG2-4	1600*1600mm	2T	4 m	670mm	1600*1600*670mm
SJG0.3-5	1800*1200mm	0.3T	5m	760mm	1800*1200*760mm
SJG1-1.5	2000*1500mm	1T	1.5m	520mm	2000*1500*520mm
SJG1-4.2	2000*2000mm	1T	4.2m	850mm	2000*2000*850mm
SJG3-3.5	2000*2000mm	3T	3.5m	800mm	2000*2000*800mm
SJG2-5	2200*1500mm	2T	5m	1050mm	2200*1500*1050mm
SJG1.5-8.5	2400*1600mm	1.5T	8.5m	1450mm	2400*1600*1450mm
SJG2-3.5	2400*2000mm	2T	3.5m	780mm	2400*2000*780mm
SJG3-7	2500*1400mm	3T	7m	1250mm	2500*1400*1250mm
SJG5-5	2800*2000mm	5T	5m	1020mm	2800*2000*1020mm
SJG2-4.5	2800*2600mm	2T	4.5m	810mm	2800*2600*810mm
SJG2-2	3000*1300mm	2T	2m	600mm	3000*1300*600mm
SJG1-5.8	3000*2400mm	1T	5.8m	770mm	3000*2400*770mm
SJG3-7	3000*2500mm	3T	7m	1080mm	3000*2500*1080mm
SJG4-1.65	3200*1850mm	4T	1.65m	600mm	3200*1850*600mm
SJG28-1.9	4000*3500mm	28T	1.9m	800mm	4000*3500*800mm
SJG2.5-6	4500*2200mm	2.5T	6m	1000mm	4500*2200*1000mm

Please tell us the following questions and then we will send our quotation and design drawing to you ASAP.

1) Max platform height

2) Loading capacity
3) Table size (L*W)

Factory Pictures: