Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Earth-moving Machinery  >  Excavators

CE aproved hydraulic track excavator, 21 T operating weight, Original ISUZU diesel engine - details see: https://www.machineto.com/hydraulic-crawler-excavator-xcg210lc-8b-10106636

Uptime

• Advanced John Deere Phoenix Electronic Control Systemprovides high electrical system reliability. Electrical system uses minimal relays and unsealed connections. Most circuits are controlled by the Flex Load Controller (FLC). Monitor, Sealed Switch Module (SSM), and FLC all communicate on Controller Area Network (CAN), which minimizes number of wires.
• Powered by proven, reliable Isuzu engines. The 210-8B use a 6.5 L turbocharged engine and the 330-8B uses a 7.8 L turbocharged engine. All engines are Tier 2/Stage II emissions compliant.
• Sealed Switch Module (SSM)conveniently combines most cab switches into one central location. SSM is well protected from dust and moisture, and it has a much longer life cycle than rocker switches.

MODEL	XCG210LC-8B
Rated bucket capacity	0.9 m3
Operating weight	21380
Engine
Model	ISUZU BB-6BG1T
Rated output	120kW/2150 rpm
Bore × stroke	105/125 mm
Displacement	6.494 L
Max. torque	582.5 Nm
Batteries	2×12 V
Hydraulic System
Main pumps	2x Variable displacement axial piston pumps
Max. flow	2x 200 L/min
Hydraulic motors
Travel motors	2x Variable displacement axial piston motors
Swing motors	1x Fixed displacement axial piston motor
Relief valve setting
Implement circuit	31.4 Mpa
Swing circuit	25.5 Mpa
Travel circuit	31.4 Mpa
Pilot circuit	3.9 Mpa
Max. bucket digging force	135.4 KN
Max. arm digging force	99 KN
Swing System
Swing speed	13.5 rpm
Drive
Max. drawbar pull	183 KN
Travel speed
High speed	5.3 Km/h
Low speed	3.2 Km/h
Max. grade ability	35o
Undercarriage
Carrier rollers	2x 2
Track rollers	2x 9
Track pads	2x 49
Shoe width	600 mm
Ground pressure	41.83 kPa
Capacities
Fuel tank	390L
Hydraulic tank	190 L
Hydraulic System	220 L
Cooling system	28 L
Engine oil	21.5 L
Travel reduction unit	2x 5 L
Swing teduction unit	4.4 L
Working Ranges
Max. cutting height	9587 mm
Max. dumping height	6985 mm
Max. digging depth	6470 mm
Max. vertical wall digging depth	5410 mm
Max. digging reach	9780 mm
Max. digging reach on ground	9610 mm
Min. front swing radius	3548 mm
Standard boom	5700 mm
Standard arm	2900 mm
Dimensions
Overall length	9762 mm
Overall height of boom	3015 mm
Overall Width	2980 mm
Overall height of cab	2900 mm
Counterweight clearance	1090 mm
Min. ground clearance	468 mm
Tail swing radius	2870 mm
Track ground length	3640 mm
Track length	4440 mm
Track gauge	2380 mm
Track overall width	2980 mm
Shoe width	600 mm
Overall height of counterweight	2060 mm
Overall width of superstructure	2710 mm