Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

aac block, 1.Air turnover cutting machine, 2.ISO 9001:2000:CE, 3.High cutting precision, 4.Profession manufactuer - details see: https://www.machineto.com/hy-aac-block-10076341

HY aac block

JQF6.0M /4.2M Steam-cured aerated concrete cutting machine unit conclude the Vertical(level) cutting machine(vertical-cutting machine)Horizontal cutting machine(cross-cutting machine), cutting table and walking.

Cutting process
When the green body(which is ready to be cut) is overturned an angel of 90 in the air by the overturn crane and then is hanged to the cutting table, after demoulding, and then with the vertical-cutting machine, cross-cutting machine to cut it into six sides. First of all, starting the vertical-cutting machine. When it works along the rails, you should cut the both sides of the green body and stop at the front of the green body after finishing it. And then the cross-cutting machine will March to the green body's position and stop. The cutting frame of cross-cutting machine will cut vertically on both sides and return to the original station after the semi-finished hanger leaving the green body. And then waiting for the next cutting, every mould's cutting cycle is about five minutes.

StepMobile(fixed) Cutting Machine JQF6.0M

Name	Unit	index	Remarks
Production capacity	10 thousand m3/year	10-30	Annual production
Size of green body	M	6*1.2*0.6	Net
Cutting modules	Mm	5/10	Vertical cutting/cross cutting
Precision of cutting	Mm		Length, width, height
Cycle of production	Min/mould	5	Vertical cutting/cross cutting
Weight of production	T	18
Industrial capacity of cutting machine	Kw	12.9

StepMobile(fixed) Cutting Machine JQF4.2M

Name	Unit	Index	Remarks
Production capacity	10Thousand m3/year	5-15	Annual production
Size of green body	M	4*1.2*0.6	Net
Cutting modulus	Mm	5/10	Vertical cutting/cross cutting
Precision of cutting	Mm		Length, width, height
Cycle of productions	Min/mould	5	Vertical cutting/cross cutting
Weight of cutting machine	T	12
Installed capacity of cutting machine	Kw	11.4

Thchnological Flow of Production Autoclave Aerated Concrete

1. First,dose and match measured raw materials

2. After distributing,feed raw material into pouring mixer to make slurry

3. Through thoroughly mixing,the slurry is poured to mould

4. After pre-curing under a certain temperture and time,the block would reach a certain hardness prepare for cutting

5. Tilting hoister would turn over 90 degree of mould

6. Then open the mould and separate it from block,and take the block woth side plate ti cutting cart

7. The blocks then be cut through the cutter firstly of two vertical sides of block

8. Secondly the horizontal cutting

9. Finally the vertical cutting

10. After cutting,the block is hanged to trolly with side plate by semi-finished product hoister

11. Organizing the cut blocks and put them into autoclave

12. Hardending the blocks under certain temperture and pressure

13. Take finished products out of autoclave

14. The finished product hoister take the finished product to stock shield

15. Packed for loading

16. The side plate return back by side plate roller

17. Side plate would be organized with open mould

18. Clean the mould and preparing for next pouring

19. Steel bars processing line for slab production