Home  >  Raw Material Processing Machinery  >  Paper Product Making Machinery

1,fully automated toilet paper,toilet tissue,toilet roll rewinding production line, 2,PLC control,embossing, 3,good quality - details see: https://www.machineto.com/hx-1575-full-automatic-toilet-paper-production-line-10334398

Main features:

fully automated toilet paper production line. The logs are automatically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.

After finished winding the roller pushed out automatically. Its adopt machanism arm pusher to push the roller out. The minimum diameter of finished roll is 60mm.

Automatic trimming, gluing and sealing: it has replaced the traditional sealing of rolls with the international popular trimming and sealing, which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper, thus to cut down the production cost.

Advanced PLC programmable control technology: the winding profiles can be tight at the beginning of winding, and then getting loose, to avoid the problems that the cores are loose from the rolls after long time storage.

Automatic detection of paper break and paper wrap up: to guarantee the high quality of the finished rolls even in the high speed operation.

Coreless rewinding system has changed the traditional mathod to take out the core to make with quality solid coreless roller. Reducing the manpower.

With high precision screwy perforation knife. With 4 perforation blades to make clear perforating. The perforating pitch controlled by gear box.

Three backstands, pneumatic jumbo roll loading, and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumbo roll.

Point to point embossing unit: the paper are embossed on both sides and feel softer. It make embossing more clearer and better. The finished rolls compared to the same diameter rolls with less paper.

The web can be threaded on the machine by the two jog buttons. Its more safety and easier to feed the web.

Main Technical Parameter(HX-1575)
Finished Roll Diameter	Φ70~140 mm (Degree of tightness adjustable)
Finished Roll Core Diameter	Φ 2050 mm
Raw Material Diameter	≤Φ 1100 mm (Other sizes are available )
Raw Material Core Diameter	3(76.2 mm) (Other sizes are available )
Perforating Pitch	90~160mm (Pneumatically separating unit-Optional)
Speed	180-200 meters/min
Parameter Setting	Touch button LCD Screen operation panel
Programme Controller	MITSUBSHI Programmable Controller (PLC)
Mechanism Driving	Stepless gear box, insure the precision of finished product length
Embossing Roller	Two sets of Steel to rubber
Unwinding Paper Stand	3 ply
Pneumatic System 3high pressure air compressor, mini pressure 5kg/cm2 Pa(Provided by client)
Power	Variable frequency speed control, 7.5KW
Machine Size	6200×4200×1800mm(L×W×H)
Weight	6800kg

Main Technical Parameter(HX-150)
Log length:	1500mm~2700mm
Log outside diameter:	90mm~150mm (standard size: 110±5mm)
Cutting length:	variable
Machine speed:	160cuts/min, 2 rolls /cut
Operation speed:	150cuts/min, 2 rolls /cut
Blade outside diameter:	610mm
Installed power:	Alternating Current: 5 Horses per Machine
Frequency Conversion:	5 Horses per Machine
Alternating Current:	1/2 Horses per Machine, AC motor 5 Horses

Functions and Features:

Configuration Pneumatic embossed steel to steel, pneumatic separator

Back pressure on the use of paper planes paper, non-polar ratio adjustment, adjusting the tension of base paper.

The use of Roots vacuum adsorption system, inspiratory capacity and stable operation.

Break automatic shutdown system, to avoid breaking free paper or paper waste generated.

The use of traction before and after the switch to move the base, operation is more simple and more secure.