Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Pumps

HS-150I high-rise building cement/lime//concrete/slurry/mortar/sand grouting pump, 1. good rigidity, 2. afte-sales service - details see: https://www.machineto.com/hs-150i-high-rise-building-cement-lime-concrete-slurry-mortar-sand-grouting-pump-10093421

HS-150I high-rise building cement/lime//concrete/slurry/mortar/sand grouting pump

Introduction

Themortar pumpis a machine for transporting freshly prepared mortar for plastering and masonry work through pipes or hoses to various points at a work site; the mechanism is based on the suction and pressurization of the mortar. A distinction is made between pumps with diaphragms and those without diaphragms, depending on the action of the plunger. The is an new type of mortar pump which combines the domestic and foreign advanced technology. It is widely used in construction mortar transmission, geotechnical engineering grouting, large area coverage etc. It has many advantages, such as no pulse, high pressure, large flow, high efficiency production and easy to operate etc.

Function

It is mainly applied for tunnel, mining project, dam, foundation engineering of big bridge and high-rise building, and the different kinds of underground engineering etc.

It can be used not only for grouting cement mortar and sand mortar, combined with accessories such as compressor and spraying gun, it is also ideal equipment applied inspraying. To spray mortar, it needs a separate air-compressor. We supply spray-guns, blowing guns and grouting nozzles for additional works of mortar pumps.

It is also widely used for grouting in mine gallery, rail and road tunnel, hydropower construction, slope consolidation, subway and civil engineering etc.

1.Use it to grout in in tunnel, mine, stone drift, concrete hoistway and underground, to shut off the water.

2.Use it to transport mortar in high buildings.

3.Use it to grout reservoir, hydropower station, port, and wharf,

4.Use it for foundation treatment.

5.Use it to reinforce and grout soft foundation.

6.Use to backfill irrigation bolt support.

7. In the construction engineering, it is used for horizontal and vertical transportation mortar or massive spray.

8.In the chemical branch and paper industry, transportation pulpous state raw materials and wastes.

9.In coal-fired power plants, it is used to transport fly ash pulp.

10.In the national defense and civil air defence works, mining tunnel construction of it can be used for grouting slope protection.

11.In the highway pavement maintenance, it used for cement road surface collapse pressure mud filling.

12.Prestressed component in engineering, it is used for cement road surface collapse pressure mud filling.

13.In water conservancy engineering, it is used for reinforcing the dam.

14.In metallurgy, steel and other industry it used to maintain the blast furnace and other equipment slurry infusion.

15.Other places where you need to grout and transport mortar.

Feature

This product adopts screw-type grouting, shuttling through a shaken filter screen. With the characteristic of large capacity, high pressure, saving time material, and easy to move It has become one of the most reliable mortar transmission equipment.

1.It not only can dual fluid grouting, but also can single liquid grouting.

2.It also be used with double hore, at the same time, can be used as grouting clear water pumps, sewage pumps, mud pump etc. It widely used in tunnel digging ,maintenance road and bridge dam mine construction of high-rise building foundation and all kinds of injection constructions.

3.Drainage: Factory drainage and sludge removal, transporting dehydrated

cakes, facilities working with clear water and sludge, drainage facilities,

removing sludge and initial impurities at sewage treatment facilities, removing

surplus sludge, re-depositing sediment, transporting digested sludge, pumping

sludge, pouring sludge, pumping dehydrated cakes, pumping chemical grout

4.Construction and public works projects: different mud and earth types, plaster, chemical slime, sludge, wall clay, earth and sand, sewage, clay, bentonite, pouring spray-application materials used for water repellence, spray-application tunnel shielding jobs, grout pouring, etc.

5. This product with advanced technology, stable performance, reliable, the operation is simple, is the present domestic reliable quality of a kind of conveying grouting equipment.

Technical parameters

Model	HSP-150I	HSP-150II	HSP-150II	HSP-150III
Output Capacity	8M³/H	(Single cylinder)4M³/H	(Double cylinder )8M³/H	8M³/H
Max Working Pressure	7MPa	8MPa	6MPa	7MPa
Level Transmission Distance	200-300M	300M	250M	250-300M
Vertical Transmission Height	60-80M	80M	60M	60-80M
Machine Weight	760KG	780KG	780KG	820KG
Max Ratio(sand : cement:water)	3:01:01	3:01:01	3:01:01	3:01:01
Power	11KW	11KW	11KW	11KW
Size	1500*1300*800MM	1500*1300*800MM	1500*1300*800MM	1500*1300*800MM
Diameter of piston	80MM	80MM	80MM	80MM