Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Vacuum Drying Equipment

Vacuum Oven for Electronic Components(Vacuum Programming)ROHS and CE certificate, High accurate temperature - details see: https://www.machineto.com/hplc-6000-vacuum-oven-for-electronic-components-vacuum-programming-10297175

Product Name:HPLC-6000Vacuum Oven for Electronic Components(Vacuum Programming)

Product Feature:

• Adopts originated domestic streamline arc design, the outer is made of cold rolled steel plate, the surface is static lacquered;
• Temperature control system adopts microcomputer single chip technology, with the functions of temperature control, timing and over-temperature alarm;
• Double screens of high light nixie tube display, the value displayed well, predominant performance, set and adjust parameters by touch type buttons;
• The interior chamber is made of stainless steel material, the design of corners semicircular is easy to clean;
• The tightness of door can be adjusted by user optionally, the silicone rubber door seal whole shaped, ensure the high vacuum degreed in chamber;
• The chamber is quadrate to maximize the volume, the door adopts steel bulletproof double glass which is easy for observation.

Vacuum program segment control:
Vacuum process control equipment can provide procedural programming, simply set the value of the degree of vacuum, respectively, according to your requirements, dwell time value. Example: program control vacuum cycle, the vacuum degree of V1, holding pressure time value of T1, the next paragraph vacuum degree V2 dwell time value T2, users need to vacuum process can achieve a maximum of 18 segments programmable.
Specific setting method:
Through the touch screen, the first paragraph of the user equipment degree of vacuum of V1, and the holding time T1, the second paragraph of the degree of vacuum V2 holding time T2, the third paragraph of the degree of vacuum V3, holding time T3 ..........., until the 18-segment vacuum degree V18 , hold time T18.

Procedures set boot device, equipment run in accordance with a pre-set program, specific operation, see the following graph:

Users use to illustrate:
The whole workflow
Preparatory work
turned on the oven power
the need for dry goods or specimen through the track into the studio, closed the door
turn on the power
Operating temperature value is set to start heating equipment has begun to enter the stage of automatic thermostat
vacuum value and time value is set to start the vacuum pump into the automatic vacuum stage.
to the set time, the vacuum pump is automatically closed.

Technical Feature:

Model	HPLC-6020	HPLC-6030	HPLC-6050	HPLC-6090	HPLC-6210	HPLC-6250		HPLC-6500
Power supply	220V ,50Hz				380V ,50Hz
Temp. range	RT+10°C~250°C
Temp. fluctuation	±0.5°C
Power consumption	900W	1200W	1800W	3000W	4200W		4600W	8000W
Vacuum degree	0.01KPA ~ 100KPA
Interior Dimension(mm)	300×300×275	320×320×300	415×370×345	450×450×450	560×640×600	700×600×600		630×810×845
Overall Dimension(mm)	580×450×1150	630×510×1160	720×525×1235	615×590×1470	720×820×1750	1050×760×1610		790×1030×1850
Shelves	1	1	2	2	3	3		4

Note:This section is vertical vacuum oven, the top is a studio, the bottom is a vacuum pump kit. Standard configuration for rotary vane vacuum pumps. If the vacuum reached 100Pa level, should be equipped with high-power vacuum pump.

Optional accessories:

• Programmable LCD temperature controller
• Inert gas valve
• Water filters