Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

Hot Selling Yonghua Slag l3-Cylinder Dryer, 1.large heat exchange area, 2.high evaporation intensity, 3.good quality, 4.low cost - details see: https://www.machineto.com/hot-selling-yonghua-slag-3-cylinder-dryer-10292969

Hot Selling Yonghua Slag 3-Cylinder Dryer

Place of Origin:Henan China (Mainland)	Brand Name:Yonghua	Model Number:LH
Type:Spray Drying Equipment	color:As your request	warranty:one year

Introduction

3—cylinder dryer is composed of three concentric cylinders of different diameters in accordance with certain mathematical ralationship and structural form, embedded in each phase.

Main principle

According to thermal power principle, the lifting blade and guiding plate of different angles and spacing are provided in the cylinders, this structure can guarantee that dried materials move under the gravity action and along the direction of spiral movement.

Hot Selling Yonghua Slag 3-Cylinder Dryer

Advantages

The materials can keep enough stay time and sufficient dispersion in cylinders, which makes full heat exchange between the materials in cylinders and the hot air from the combustion chamber, eliminating the defects shch that conventional drying equipment often has wind tunnel on its section to make heat exchange area small and unit volume evaporation intensity low.

The Applications of dryer:
A dryer is a kind of mechanical equipment which uses heat energy to reduce the water content of materials.
Industrial drying equipment is mainly used in building materials manufacturing, metallurgy and chemical industry, and cement production industry, etc. to dry mineral slag, limestone, coal powder and clay, etc.
If used in combination with our coal gasified, our dryer can also be used for fine chemical drying.
Our industrial dryers are also regularly used in compound fertilizer production lines.

The Features Of dryer:

1. Our dryer is designed with anti-sticky drum-wall and assembled material-lifting board.
2. This drying equipment is divided into secondary-granulating section, balling section, polishing section and drying section, etc. What worth mentioning is that our dryer features convenient installation and transportation as a result of its flange connection
3. This large sized drying equipment is primarily composed of vibrating feeder, heating furnace, drying device, and air intake and air outlet device, and more.
The vibrating feeder enables materials to spread uniformly on the mesh belt.
An air-intake fan with large air flow blows away water content of materials, and then the water content will be discharged from the air-outlet.
4. Our dryer has the features of low noise, little pollution and good drying effect.

The Working Principle Of dryer:
Dying process needs to consume large amount of heat energy. In order to save energy, some materials with high moisture content, suspending liquid and solution which contain solid objects should be mechanically dewatered or heated first, and then they can be dried in a dryer to get dry solids.

During drying process, heat and weight (moisture content) transfer need to be finished simultaneously, thus guaranteeing a higher moisture and water vapor partial pressure inside the dryer than that outside the dryer, and guaranteeing a higher temperature of heat source than that of materials.

Main Technical Parameter

Model(m)	Outer tube diameter(m)	Length of outer tube(m)	Cylinder speed(r/min)	Capacity(t/h)	Moter power(kw)	Reducer model
LHΦ2.0×4.5	2.0	4.5	4-10	13-17 10-15	5.5×2	XWD-5.5KW-8
LHΦ2.5×6	2.5	6	4-10	21-28 18-25	5.5×4	XWD-5.5KW-5
LHΦ3.2×7	3.2	7	4-10	45-47.5 40-45	7.5×4	XWD-7.5KW-8

Contract: Anne Zhang

Tel: 0086- 13598443935

...