hot selling rotary drier for Sawdust, Sand, Slag, Vinasse Etc

Rotary drier:, 1.20years experience, 2.High capacity, 3.Easy operation, 4.Low energy cost - details see: https://www.machineto.com/hot-selling-rotary-drier-for-sawdust-sand-slag-vinasse-etc-10290960

Type:Fluid Bed Drying Equipment	Place of Origin:Henan China (Mainland)	Brand Name:yonghua	Model Number:GZseries
name:hot selling rotary drier:color:any color	warranty:1year:installation:engineer direct install

Rotary drier Instruction:

Rotary drier is widely used for drying materials in the industries of cemet, mine, contruction, chemical, food, compoud fertilizer , etc. Feeding and discharging unit is installed with thermocouple to control drier temperature. The temperature change of drier's feeding end can be indicated by the thermometer to control the inner drier temperature ( generally 250-350°C)

application of rotary dryer:

The rotary dryer made by our company is mainly used in buiding materials ;metallurgy ,chemical plant ,cement plant for drying of limestone slag ,ceal powder ,slag clay stone

Rotary drier Structure:

Rotary drier machine is mainly composed of shell, back and forth supporting wheel, feeding and discharging unit and gear cap. The accessories which are not in the the scope of this machine include firebox, feeding and discharging equipment, dust catcher, etc.

working principle of rotary drier:

the wet materials are conveyed to the hopper through the belt conveyor or bucket elevator ,and then enter into the feed end through the hopper charger and the feeding pipe in sequence .the inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly .the dryer cylinder is a rotation cylinder with slight inclination with the horizontal line.the materials enter from the higher end ,and the heat carrier enters from the lower end.the two contact each other from opposite directions,but there are also circumstances that the heat carrier flows into the dryer body together with the materials .along with the rotation of cylinder ,the materials run to the lower end due to gravity,in the forward movement of wet materials in the dryer body,the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials ,and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.

technical parameter of rotary drier:

Model (mm)	Obliquity(%)	Rotation speed (r/min)	Feeding temperature (degree)	Power (kw)	Capacity(t/h)	Weight (t)
Ø600x6000	3-5	3-8	<=700	3	0.5-1.5	2.9
Ø800x8000	3-5	3-8	<=700	4	0.8-2.0	3.5
Ø800x10000	3-5	3-8	<=700	4	0.8-2.5	4.5
Ø1000x10000	3-5	3-8	<=700	5.5	1.0-3.5	5.6
Ø1200x10000	3-5	3-8	<=700	7.5	1.8-5	14.5
Ø1200x12000	3-5	3-8	<=700	11	2-6	14.8
Ø1500x12000	3-5	2-6	<=800	15	3.5-9	17.8
Ø1800x12000	3-5	2-6	<=800	18	5-12	25
Ø2200x12000	3-5	1.5-6	<=800	18.5	6-15	33
Ø2200x18000	3-5	1.5-6	<=800	22	10-18	53.8
Ø2200x20000	3-5	1.5-6	<=800	30	12-20	56
Ø2400x20000	3-5	1.5-5	<=800	37	18-30	60
Ø3000x20000	3-5	1.5-5	<=800	55	25-35	78
Ø3000x25000	3-5	1.5-5	<=800	75	32-40	104.9