Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drum Drying Equipment

High efficient, energy saving, Reasonable structure, famous brand motor, environmental friendly - details see: https://www.machineto.com/hot-sale-rotary-sawdust-dryer-machine-with-iso-certification-10287937

1. Brief introduction of rotary sawdust dryer machine

Rotary drum dryer is widely used for drying slag limestone, coal powder, slag, clay, etc. Dryer can also be used in building materials, metallurgy, chemical and cement industry. Dryer mainly consists of dryer body, raw material feeding plate, driving and supporting device, seal ring, etc. Dryer can be generally divided into four types, they are: rotary dryer, triple-drum dryer, indirect heat transfer dryer, vertical dryer. Different kind of dryer has its own characters and advantages, the specific choice of a special dryer depends on different elements.

2. Rotary sawdust Dryer, rotary dryer machine

Rotary dryer is a kind of highly efficient, stable and reliable heating drying equipment (dryer), it is designed by Hengxing heavy equipment to dry materials of high moisture or strong stickiness. Rotary dryer has a better performance than tube bundle rotary dryer, blade rotary dryer. Rotary dryer has the features of big capacity, low energy cost and high efficiency.

1).Rotary sawdust dryer machine is used for drying materials with a certain humidity or granularity in milling of food ,chemical ,ores, building materials, metallurgy and chemical industry;

2). Rotary sawdust dryer machine has a strong adaptability of materials and it can dry various materials. The operation is very simple and liable. So this kind of coal slime dryer has playing important role in various industries;

3).Rotary sawdust dryer machine is applied in materials like coal slurry, mud, filter gypsum, muddy, high-moisture swell soil, electroplate mud, and other materials and areas.

Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow) of the rotary dryer, or toward the feed end from the discharge end (known as counter-current flow) of the dryer. The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the rotary dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated.

Rotary sawdust dryer machine technical parameter:

Model	diameter (mm)	Drum length (m)	Main reducer		Speed (r/min)	Production capacity (t/h)	Power (kw)	Weigh(t)	Volume(m3)
			Model	Ratio
Φ1.0X10	Φ1000	10	JZQ450-16-11		6.73	1-3.8	5.5	7.5	7.85
Φ1.2X12	Φ1200	12	ZL50-16-1		5.8	1.8-5.5	11	13.8	13.31
Φ1.5X12	Φ1500	12	JZQ500-111-2F	16.46	4.8	4-9	15	22.3	21.2
Φ1.5X 15	Φ1500	15	ZQ50-1611-2	16.46	4.8	4-10	18.5	28.8	26.5
Φ1.8X14	Φ1800	14	JZQ650-111	18.84	3.2	6-12	30	39.8	48.22
Φ2.2X16	Φ2200	16	ZJQ750-111	31.5	3	10-23	37	51	60.1
Φ2.2X18	Φ2200	18	JZQ750-111	31.5	3	10-25	37	53.3	70.43
Φ2.4X20	Φ2400	20	ZL85-13-1	27.16	2.83	20-40	45	78.4	90.43
Φ2.8X24	Φ2800	24	ZL100-16-1	31.5	2.59	20-45	55	97	147.8
Φ3.0X20	Φ3000	20	ZL100-16-1	41.54	2.6	25-48	55	102	141.3
Φ3.2X25	Φ3200	25	ZLH115	41.54	2.1	30-55	110	148	201

3. Triple-drum Dryer, rotary sawdust dryer machine

Triple-drum dryer is used to drying humidity particle materials, such as yellow sand used by industry, variety of sand which used in foundry industry, blast furnace slag which used in cement industry of building materials, chemical, food, compound fertilizer, copra, etc. Small particle size aclay. According to requirements of the water in the products after drying. The water content 1-0.5% or less can be achieved after process.

1). The triple-drum rotary dryer uses telescope-feed structure, dry material quickly.

2). Simple design, self-insulation, improve the heat efficiency of triple-drum rotary dryer to exceed 80%

3). The triple-drum dryer is of delicate structure, steady operation

4). The triple-drum dryer has a good drying performance, coal consumption less than 8kg 1ton material.

5). The fuel can be coal oil, natural gas, etc, granule and powder material less than 20mm can be dried in the triple-drum dryer.

6). The triple-drum sawdust rotary dryer reduces land area for 50% compared with single drum dryer, so construction investment is saved 50%, power consumption saved 60%.

7). Finished product moisture of triple-drum sawdust dryer can be adjusted depending on clients’ requirement.

8). Triple-drum dryer is of lower outlet temperature, longer using life of dust removal.

9). Triple-drum dryer is driven by tug, not gear and pinion.

10). Finished product temperature of triple-drum dryer is lower than 60°C, packing can be done continuously

Rotary sawdust dryer machine technical parameter:

Specification Parameters	Dia 2* 4.5m	Dia2.2*5m	Dia2.5*8m	Dia2.7*6.5m	Dia3.0*6.5m	Dia3.2*7m	Dia3.6*8m	Dia4.2*8m
Outside tube diameter	2	2.2	2.5	2.7	3.0	3.2	3.6	4.2
Outside tube length	4.5	5	6	8.5	6.5	7	8	8
Cylinder volume	14.13	18.99	29.43	37.19	45.92	56.27	84.39	110.78
Cylinder speed	4-10	4-10	4-10	4-10	4-10	4-10	4-10	4-10
The highest influx of air temperature	700-750o C	700-750oC	700-750oC	700-750o C	700-750o C	700-750oC	700-750oC	700-750oC
capacity	13-18	15-23	20-28	24-33	35-40	40-60	55-75	70-120
motor power	5.5*2	7.5*2	5.5*4	7.5*4	11*4	15*4	18.5*4	22*4

4. Indirect heat transfer dryer, rotary sawdust dryer machine

The indirect heat transfer dryer supplied by Hengxing is widely used in building materials, metallurgy, and chemical industry, cement plant for drying of limestone slag, coal powder, slag, and clay stone. The indirect heat transfer dryer mainly consists of rotary body, raw material feeding plate, driving and supporting device, seal ring and so on. It has reasonable structure, fine workmanship, high capacity, low consumption and convenient operating and so on. therefore, it is greatly favored by customers.

1).By direct or indirect heating, the heating efficiency can reach up to 95%

2).Operating under high temperature and low oxygen to avoid materials being self-burning or exploding when drying

3).Big drying capacity, highly industrialize and low cost

4).Low amount of air are required to save tail gas handling cost

5).Rotating part rotates slowly and low abrasion wear

6).Firm construction and durable

7).Compact structure, big heating area, and smaller installation area

rotary sawdust dryer machine technical parameter:

Items	Inside diameter of outer shell	Inside diameter of inner shell	Shell length	Shell cubage	Shell	Lifting blade	Highest inlet air	Dimensions
Shell diameter *shell length	mm	mm	m	m3	Obli-quity	form	Tem.oC
Ø1.5*15m	1500	500	15	20.27	3-5%	Lifting form	850	16.2*2.7*2.7
Ø1.5*17m			17	22.97				18.2*2.7*2.7
Ø1.5*19m			19	25.68				20.0*2.9*2.9
Ø1.8*21m	1800	650	21	35.91	3-5%	Lifting form	850	22.5*2.7*2.7
Ø1.8*23m			23	39.33				24.5*2.9*2.9
Ø1.8*25m			25	42.75				26.5*2.9*2.9
Ø2.2*21m	2200	800	21	58.1	3-5%	Lifting form	850	----
Ø2.2*23m			23	63.61
Ø2.2*25m

Our certificate for rotary dryer machine:

rotary dryer machine Products scene:

rotary sawdust dryer in delivery

You are welcome to visit our factory to see our rotary sawdust dryer machine at any time!! rotary dryer in stock.

You are welcome to our factory! Call Rocky:0086-18837173732