Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

Flotation tank:, 1. High reliability and efficiency, 2. Low energy consumption, 3. Robust structure, 4. Easy maintenance - details see: https://www.machineto.com/hot-sale-copper-ore-flotation-tank-with-high-efficiency-10315342

Application of the flotation tank:

1.This float selecting machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc.

2.Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc.

3. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure.

4.While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth.

5.By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board.

Working Principle of flotation tank:

1. After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
2. When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
3. As a result of the centrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized bubbles which are then equally distributed to groove wall and removed upward to the separation region. These bubbles then gather as a foam layer and are discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.
4. Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.
5. The left pulp that are not sucked by the impeller enters into the third tank after going through the process of first tank Thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the floatation machine.

Technical parameters of SF series flotation tank:

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4
Tank volume (m3)		0.37	0.7	1.2	2.8	4
Impeller diameter (mm)		300	350	450	550	650
Production capacity(m3/min)		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4
Impeller speed(m3/min)		352	400	312	268	238
Motor	Type	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y180L-6
		Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	Power (KW)	1.5	3	5.5	11	15
		1.1	1.1	1.1	1.1	1.5
Dimensions (L×W×H) (mm)		700×700×750	900×820×950	1100×1100×1100	1700×1600×1150	1850×2050×1200
Single Weight (kg)		468	600	1373	2338	2660

Features of Flotation tank :

The flotation machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and flotation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.

Why choose our company machine?

1. We are factory (NOT Dealer)

All machinery fromHenan Xingyang Mining Machinery Manufactoryaremade by ourselves, No trade company make

Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).

So please buy from factory.

2. We will do our best to satisfy every customer's needs

Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.

We will leave 5% retention money for 3 months to show our sincerity. You can pay it after the machine go into normal operation.

3. Training & service

Training is free to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition,we provide one-year warranteeto make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

4. If you are new for this business, I will help you

Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on

5. We will recommend a suitable type for you and send you a best quotation