Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Machine Centre & Parts  >  Machine Centre

High Configuration, Independent spindle, high accuracy, long working life, Special machine tool frequency conversion motor - details see: https://www.machineto.com/hot-independent-spindle-fanuc-simens-3axis-profile-sliding-linear-guideway-cnc-lathe-horizontal-vertical-5-axis-machining-center-10130203

1. First, pls leave your e-mail address in your inquiry. We can contact your directly.
2. Independent spindle structure, reasonable bearing support span, high speed, good turning precision
3. Spring chuck or imported hydraulic chuck.
4. Board for X direction is thickened and widened, can be installed electric tool or platoon knife, convenient and practical.Screw adopts three support positioning structure with high precision long service life.
5. Integration casting lathe feetwith high rigid, generous appearance.
6. Integral casting diversion slot, effectively prevent cutting fluid leakage.
7. Standard configuration,33.3 HZ special frequency conversion motor, low speed great torque, low temperature, saving energy and reducing consumption, and the highest turn short dial is 6000 RPM
8. The flexible coupling is adopted between screw and servo motorimproving the positioning accuracy and reducing transmission noise.
9. Special ball screw positioning bearing and precision lock nut,high accuracy, free maintenance and long working life.
10. Automatically lubricated device,both of the Injection time and oil supply can be arbitrary regulated, and the whole machine has 6 place automatic lubrication points and 1 place manual added lubricating points.

Parameters:

Item Model	Unit	VMC-855
working tale size	mm	530X1000
X/Y/Z travel	mm	800/500/700
Distance between spindle end and table	mm	110-810
Distance between spindle center and column guide way	mm	575
Maximum weight of working table	kg	600
table-T-slot	mm	5-18-100
X/Y/Z axis rapid feed	mm/min	18000
three axis working rapid speed	mm/min	8000
X.Y.Z axis screw mandrel size	mm	4010
positioning accuracy	mm	±0.005/300
repeat positioning accuracy	mm	±0.003
spindle speed	rpm	8000
spindle taper	mm	BT40/150
control system	/	MITSUBISHI-M70VA/FANUC0i-mate-MD
torque force of spindle motor	nm/kw	35/7.5
torque force of X.Y.Z motor	nm	20-50
pneumatic source requirement	Kg/Cm2	6
power consumption	kva	20
machine size	mm	2550*22000*2700
machine weight	kg	5800

Original manufacture for some parts of VMCs
No.	Original place	Manufacture
1.CNC controller	Japan	Mitsubishi M70VA/FANUC:0i-mate-MD
2.Axes driving motor	Japan	Mitsubishi/FANUC
3.Spindle driving motor	Japan	Mitsubishi/FANUC
4.Spindle transmission belt	Japan	UNITTA
5.Spindle	Taiwan	LUOYI/PUSEN/TAIDA
6.X,Y,Z ball screw	Taiwan	Yintai/ Rexroth
7.Fixed bear of ball screw	Japan/Germany Japan/Germany	NSK/FAG
8.Spindle bearing		NSK/FAG
9.Machine body	China	high strong cast iron
10.X,Y,Z axes sticky plastic	America	Shamban
11.Liner rail	Taiwan/Germany	YINTAI/Rexroth
12.ATC	Taiwan	Hand Wheel ATC
13.Contactor	Germany	Schneider
14.Overloading protector	Germany	Schneider
15.Main power switch	Germany	Schneider
16.Solenoid Value switch	Taiwan	Airtac
17.Hits the knife cylinder	Taiwan	XIEPIN/SHANGPIN/DEYUE
18.Cooling water pump	China	Rocoi
19.Automatic lubrication	Sino-Japanese joint venture	Bijur/RIHUA/HEGU
20.Couplingsystem	Germany	R+W coupling
21.Guard	Taiwan	Keyarrow

Product description:

1, Spindle drive: Direct, Maximum speed: 8000rpm (standard), Optional belt-type spindle: 10000rpm. Direct coupled spindle: 12000rpm/15000rpm.

2, Tool magazine: Cam 24 ATC or arm type 24 ATC to meet the needs of different customers.

3, The structure of the head is heavy box-type. Internal strengthening ribs, high rigidity.

4, The electrical box employs sub-isolation design, to separate the heat source; in front of the box, the heat exchanger is used for cooling, to prevent outside dust into the electrical box; rear fan is used for cooling fan hot plate.

5, three axes adopt high precision ball screws, combined with the precision nut preload and pretensioners of tailstock, to ensure that the backlash and thermal deformation of machine for long periods keeps low.

6, the three axes are hard rail, U.S. Shamban viscoplastic, fast moving speed: 18/18/18 (m / min), cutting speed, 10/10/10 (m / min.)

7, Y-axis datum is increased to provide the best sports datum; the super large span between the two rails makes sure the maximum Chip rigid, ensuring the service life of Y axis.

8, all the main parts are made of high strength cast iron, strong shock absorption and good wear resistance; aging, and stress relief to ensure long-term best accuracy.

9, All finished products have to undergo a laser positioning corrections and circular test to ensure the best positioning accuracy and servo characteristics.

Features:

This machine is designed reasonably with simple and compact structure, great mechanical rigidity, and

the belt spindle drive of good accuracy. The machine is equipped with a pre-flush and rear chip conveyor, to facilitate the operator to clean up. The standard configuration goes with MITSUBISHI CNC control system. It can be controlled manually and automatically. Besides, it has manual jog under automatic control condition. It has the features of the data self-protection due to a sudden power failure, high reliability, Long life, low energy consumption, high control precision, strong anti-jamming capability and fast the mobile speed, suitable for the milling, drilling, tapping and other operations of the mold and some other parts.

Company introduction:

We are an industry and combination enterprise with several years’ development. JIANHAI has gained its position of prominence over the years in the field of boring and milling machines for large size components. JIANHAI boring and milling machines can be used in the fields like energy, aerospace, shipbuilding, diesel engine, defense, earthmoving and general mechanics.

We have already passed the ISO9001 and CE authentication. The trade part is the agent of CNC machines like boring machine, CNC Milling Machine, CNC lathe, machining centers and so on. They are known for their strength, construction, durability, low maintenance cost and ease of operation.

We do business with sincerity and honesty, and welcome anyone who wants to establish business relationship with us.

After-sales service:

a. Free installation and debugging

b. Free operator training

c. Free maintenance within 1 year

d. Long warranty and technology support

1. Delivery Date:it will be confirmed when you make the order.

2. Payment Terms:

2.1. 30% Deposit by TT before production and 70% payment by TT before shipment;

2.2. 30% deposit by TT before production and 70% L/C at sight before shipment;

2.3. 100% L/C at sight.

We promise:

1.Regular market return visit.

2.Professional technical training.

3.Machine tool accessories replacement.

If you need to know more about CNC vertical machining center economical VMC pls contact us!