Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Heat Transfer Equipment

heat transfer fluid, support stand, 7 heads copper tips - details see: https://www.machineto.com/hot-fix-machine-heat-transfer-fluid-10285278

hot fix machine/heat transfer fluid
Features of heat transfer fluid:
1. Popular heat transfer fluid with 7 heavy duty various sizes tips and
a table stand. Perfect to apply heat transfer fluid to any surface.
2. Ergonomic handle; lighted on/off switch; sturdy support protects work surfaces.
3.heat transfer fluid Tips: 2mm 6ss, 3mm 10ss, 4mm 16ss, 5mm 20ss, 7mm 34ss, 9mm flat, Hot Spot
4.heat transfer fluid Voltage: 100V to 240V.
5. Apply sparkly rhinestone accents to tote bags, t-shirts, handbags, and other garments and accessories

Model No.+Name	pictures	description	apply to	packing
SJ-1318 hot fix applicator		voltage:100V-240V power:12W with skidproof sleeve and indicator light On/off switch 7 copper tips( 2mm 6ss, 3mm 10ss, 4mm 16ss, 5mm 20ss, 7mm 34ss, 9mm flat, Hot Spot ) Support stand include	ideal decoration for fashion Clothes,Gloves,Shoes,Bags,Jeans, T-shirts Leather and so on	1pc/blister card
SJ-1312 hot fix applicator		voltage:100V-240V power:12W with skidproof sleeve and indicator light On/off switch 7 copper tips( 2mm 6ss, 3mm 10ss, 4mm 16ss, 5mm 20ss, 7mm 34ss, 9mm flat, Hot Spot ) Support stand include	ideal decoration for fashion Clothes,Gloves,Shoes,Bags,Jeans, T-shirts Leather and so on	1pc/blister card
SJ-1318 hot fix applicator		voltage:100V-240V power:12W with skidproof sleeve and indicator light On/off switch 7 copper tips( 2mm 6ss, 3mm 10ss, 4mm 16ss, 5mm 20ss, 7mm 34ss, 9mm flat, Hot Spot ) Support stand include	ideal decoration for fashion Clothes,Gloves,Shoes,Bags,Jeans, T-shirts Leather and so on	1pc/blister card

How to apply hotfix crystals with an heat transfer fluidPreparation

i. You will need a firm surface to work on such as a table top or work surface; ironing boards aren’t suitable as they don’t provide enough support.

ii. If adding crystals to fabric make sure that the materials surface is flat, iron if necessary.

iii. When adding crystals to sheer fabric its best to place a piece of card or a Teflon sheet between the layers to prevent the glue from seeping through and bonding any fabric layers together.

iv. You will also need a pair of fine tipped tweezers.

v. If it’s your first time using a heat transfer fluid its a good idea to first test on a piece of card or scrap material
1. Choose the correct size heat transfer fluid tip for the rhinestone size you will be working with, the sizes are etched into the side of a tip. If you are unsure as to the size required place the tip over the rhinestone, the correct size tip will pick up the rhinestone.

2. The heat transfer fluid fits on the end of the heat transfer printing, gently screw the correct size saree design stones tip into place.

SAFETY: Make sure the heat transfer fluid is unplugged and if you are removing a tip it has already had plenty of time to cool down.

3. Turn on the heat transfer fluid , Kandi Professional heat transfer fluid has an on/off switch at the rear. Other applicator wands will only need plugging in as there is no on/off switch. (Kandi’s heat transfer fluid will take approximately 2-3 minutes to reach working temperature) Lay the heat transfer fluid on the work surface with the tip pointing away from your working area so that you do not burn your hand as it heats
4. Place your hotfix crystals onto a clean flat, solid surface. (placing them onto a piece of white card can be helpful if you are working on a dark surface)
5. Turn all the crystals so that they are facing faceted side up.

6. Once the tip has heated your ready to start creating the design, gently place the tip over a rhinestone to pick it up, but don’t press hard or the crystal may stick to the surface
7. Once selected the hotfix crystal will sit perfectly within the tip.
8. Watch the crystal it will start to look wet and shiny and may bubble when the glue melts, this is important to ensure that the adhesive is given the correct timing. Small crystals will take less time for the glue to melt than larger ones, an ss12 will only take around 8 seconds where as an ss16, 4mm crystal will take approximately 10 – 12 seconds. Allowing the adhesive to melt before placing the crystal onto the fabric will also help to prevent burning from prolonged heat of the tip coming into contact with the fabric.
9. Once the glue melts the crystal is ready to apply to the fabric. Lightly press the crystal onto the fabric holding the wand at 90° to the surface to ensure that the crystal bonds correctly. It’s a good idea to support the fabric so that it doesn’t lift when you pull the heat transfer fluid away, if the crystal gets stuck in the tip use the tip of a pair of tweezers and push downwards through the slit in the tip to free the crystal.

10. When the crystal comes out of the tip the adhesive is very hot, so give the crystal a few seconds to cool then gently pull on the crystal to see if the glue has bonded to the surface correctly. If the crystal is still loose place the tip over the crystal for a few seconds to melt the glue and then test again once the adhesive has cooled to ensure that the crystal is firmly bonded to the fabric..
11. Complete the process of adding crystals and testing until your design is complete. It will take 24 hours before the adhesive is fully set the crystallized fabric should not be washed within this time

Pictures of heat transfer fluid:

heat transfer fluid tips picture



Model: SJ-1318 heat transfer fluid


SJ-1318 heat transfer fluid package





Model: SJ-1318 heat transfer fluid



SJ-1318 heat transfer fluid package




Model: SJ-1312 heat transfer fluid



SJ-1312 heat transfer fluid package



Instructions of heat transfer fluid:
1. Wait 2 minutes for the heat transfer fluid to be fully heated at first use.
2. Pick up a crystal and wait until the glue starts to melt. You should see the glue melting in few seconds.
3. Press the crystal down and lift the wand up. You may place the crystal at a desired spot by other means. In that case place the heat transfer fluid tip on the crystal vertically and wait 5 to 10 seconds, re-press if necessary until the crystal is fixed.
4. If any crystals get stuck then use tweezers or pin to release it. It can happen for various reasons, such as if the heat transfer fluid was pressed down very hard or pressed down for too long etc. You will certainly acquire the skill with practice.

All products of heat transfer fluid:

How to use heat transfer fluid

1 Set the tips on the heat transfer fluid according to the size of rhinestone.

2 Plug the heat transfer fluid and fully heat the tip for 2 mins

3 Put the rhinestone on the target placement,hold the heat transfer fluid and put it on to the head of rhinestone vertically for 30-60seconds.

4 Move away the heat transfer fluid and check if the rhinestone stick on the fabric firmly.If not,repeat the rhinestone until it stick firmly.

5 Repeat above to make your own designs by rhinestone.

6 the more you buy ,the better price it will be you can save about 20% from ordering to us

heat transfer fluid apply for :

Rhinestones are ideal decoration for fashion Clothes,Gloves,Shoes,Bags,Jeans, T-shirts Leather and so on.

heat transfer fluid is your good partner for DIY decoration.

Make yourself to be more stylish and attractive.

Our company profile

Dongguan Century Hardware Tools S&T Co.Ltd,a subsidiary enterprise of Taiwan Century Technology Enterprise (Holding) Co., Ltd, is a new enterprise integrating the R&D, manufacture, sales and foreign trade of hardware and electronic tools. By joint stock, Taiwan Century Technology Enterprise (Holding) Co., Ltd. has staffed some Japanese experts and developed a new generation of hardware and electronic tools--Century brand, Science & Technology brand and Hengfeng brand superior tools which are characterized by nove...

Dongguan Century Hardware Tools S&T Co.Ltd,a subsidiary enterprise of Taiwan Century Technology Enterprise (Holding) Co., Ltd, is a new enterprise integrating the R&D, manufacture, sales and foreign trade of hardware and electronic tools. By joint stock, Taiwan Century Technology Enterprise (Holding) Co., Ltd. has staffed some Japanese experts and developed a new generation of hardware and electronic tools--Century brand, Science & Technology brand and Hengfeng brand superior tools which are characterized by novel styles, fine workmanship, stable quality and superior performance. In the course of the growth of our company, we have trained a technical team with solid technical strength, and we have advanced production equipment, first class inspection facilities and a perfect management system.

Our company has adhered to the principle of "customer first, quality first and technology first" for 21 years, working hard, serving the society and making contribution to the development of hardware and electronic tool industry.

Currently, our products are selling well in Europe, North America, Japan, Korea and Mainland China, and our company has provided supporting products and OEM products for many world famous brand enterprises and famous domestic enterprises.

Our company warmly welcomes clients from at home and abroad to visit us for business negotiation, and we are seeking provincial, municipal and regional distributors in Mainland China. Our modes of operation include Brand Agency and Direct Factory Sales. Hope that the people with the same ideals could join us to create a brilliant future.