Home  >  Raw Material Processing Machinery  >  Plastic Raw Material Machinery  >  Plastic Drying Machines

hot air plastic drying dehumidifier:, 1.P.I.D. temperature controller., 2.chain-wheel transmission., 3.Double condensor. - details see: https://www.machineto.com/hot-air-plastic-drying-dehumidifier-10336163

Three-in-one plastic dehumidifier:

Features:

1. Adopted P.I.D. temperature controller, the equipment can show on screen set temperature and actual temperature.

2. Up-to-date chain-wheel transmission design with more stable performance, to avoid traditional belt's disadvantage under high temperature.

3. Double condensors structure to ensure lower return air temperature and dew point.

4. The dew point of processing wind can reach -40 Centigrade. A better honeycomb is optional to use so as to make dew point reach -50 Centigrae.

5. A dew point gauge is optional to use in order to monitor dehumidifying effect anytime.

6.Equipped with emergency stop switch and protective devices of short circuit,phase-sequence,blower overload,over-heating and rotor fault etc..

7. Nice design, polish appearance, easy to move.

Specifications:

Model	WCD	200/200	300/200	400/300	500/400	600/500	900U/700H
Insulation Tank Capacity	kg	200	300	400	500	600	900
Dehumidifier air volume	m3/h	200	200	300	400	500	700
Drying blower power	kw	2.2	2.2	3.75	5.5	7.5	7.5
Regeneration fan power	kw	0.37	0.37	0.37	0.75	0.75	1.5
Dry heating Power	kw	12	15	15	18	18	18
Renewable Electric Power	kw	3.6	3.6	3.6	6	6	9
Feeding blower power	kw	1.1	1.1	1.1	2.2	2.2	2.2
Feeder piping	inch	1.5	1.5	1.5	2	2	2
Vacuum Hopper	L	12	12	12	12	12	20
Electric eye hopper	L	12	12	12	12	12	24
Height	mm	1950	2400	2700	2750	3050	3200
Width	mm	1570	1570	1570	1850	1850	1950
Depth	mm	950	950	950	1120	1120	1250
Weight	kg	560	585	635	640	750	900

Photos:

Please contact me if you are interested.