Home  >  Chemical Process Machinery  >  Pressure Vessels

Q345R LPG tank, 1>42 tons LPG tank, 2>LPG tanker DN 3200 mm, 3>LPG tank Corrosion allowance 1 mm, 4>ISO,CCC,SGS,ASME LPG tan - details see: https://www.machineto.com/horizontal-lpg-tank-42-tons-10301437

100 m³ (42 tons) LPG TANK (DN3200 mm)

HUBEI HELI SPECIAL AUTOMOBILE MANUFACTURE CO.,LTD which is one of the largest manufacture of purpose vehicle and construction equipments in China.

We can produce all kinds of LPG equipments, eg: LPG horizontal storage tank, LPG tank container, LPG tank semi trailer, LPG tank truck, LPG pressure vessel.

This LPG tank just a sample, if you have special requirement, please kindly contactor withZenger Zeng.

Cell: 0086-13707175765 / FAX: 0086-27-86709802

Following is the mainly specification of the 100 m3 LPG tank.

LPG TANK SPECIFICATIONS		EMERGENCY CUT OFF DEVICE
Product Model	LPG Tank	Model	Gas Valve: Liquid valve:
Overall dimensions (L*W*H)	11300*3224*3852 mm	Nominal diameter	Gas Valve: DN25 Liquid valve: DN50
Tank dimensions (Diameter*Thickness*L)	DN3200*20*11300 mm	Control method	Manual machinery
Net weight	Approx 23000 kg	Closing time	≤10 sec
Vessel type	III	Melting close temperature	70±5 °C
Designing pressure	1.77 Mpa	Emergency cut off type	Emergency shut-off valve and valve combination of over-current limit
Working pressure	≤1.62 Mpa	LIQUID INDICATOR
Designing temperature	-19~+50 °C	Model
Loading material	Liquefied petroleum gas (Propane)	Version	Magnetic
Corrosion margin	1.00 mm	Nominal pressure	2.5 Mpa
Volume	100 m³ (42 tons)	Scope of testing	50~3100 mm
Heat treatment type	Entirety	Precision	2.5 Mpa
Filling factor	448.4 ( 50°C) Kg/ m³	SAFETY VALVE
Tank & Pressure material	Q345R	Model
Hydraulic pressure test	2.21 Mpa	Version	Built-in
Gas tight pressure test	1.77 Mpa	Nominal pressure	2.5 Mpa
Cylinder thickness	18.47 mm	Nominal radius	DN80­­
Head thickness	18.42 mm	Opening pressure	1.68~1.76 Mpa
Service life	10 years	Re-seating pressure	≥0.8 Mpa opening pressure
Filling medium	Propane LPG	LOADING AND UNLOADING DEVICE
DETECTION		Inlet pipe	DN80
Standard 1: GB 150-1998 “Pressure Vessels”		Discharge pipe	DN80
Standard 2: “Safety regulation of pressure vessel”		Inlet port	DN50
		Drain valve	Quick Connector type. DN80
Design standard meet ASME, SGS, etc. Another more LPG tank and accessories, please contact with S-K-Y-P-E Zengertruck		Vent nozzle port	DN80