High quality Z purlin roll forming machine

High quality Z purlin roll forming machine, 1.Beautiful appearance, 2.Low noisy, 3.Good service after sales - details see: https://www.machineto.com/high-quality-z-purlin-roll-forming-machine-10088418

Type:Steel Frame & Purlin Machine	Place of Origin:Shanghai China (Mainland)	Brand Name:Allstar	Color:can produce as you like
Size:can produce as you like

l Main components

1. decoiler

2. feeding guide

3. main roll forming system

4. hydraulic station

5. puncher

6. hydraulic cutting service

7. PLC computer control

8. Run our table

l Machine layout:

Decoiling ----- feeding -----punching -------- roll forming ----- punching------ cutting ----- running out

l Operation flow:

decoiling → feeding guide → flattening → roll forming →punching for horizontal or vertical holes → measure length → cutting → run out

Note: Pre-punching or post-punching is determined by detailed place of hole.

l Technical parameter:

1) Material thickness: 1.5-3.0mm

2) Main motor power: 18.5kw

3) Dimension: about 8600mm*920mm*1300mm

4) Total weight: about 8.6T

l Technical specification

1) Decoiler

Manual: un-powered

capacity: 5t

2) Flattening device:

it is used to make the material flattening before feeding into the roll forming machine.

3) Main forming machine

Shaft diameter: 70mm

Shaft material: high grade 45# steel, heated and quenched treatment HRC60-620

Forming station: 13 main steps, and 7 auxiliary steps

Roller material: GCr15 bearing steel

It can make all the size of profile in the table through changing the position of rollers.

Forming speed: 3-10m/ min

Voltage: 380V, 50HZ, 3 phase

Machine structure of the machine: 36# “H” steel

Thickness of frame stand: 16-18mm

Transmission: by chain

4) Hydraulic cutting:

Hydraulic power: 5.5kw

Material of blade: Cr12 with quenched treatment HRC 60-62

Cutting system: adopt advanced hydraulic drive, automatic cut after forming, no distortion and waste, high safe factor (main motor stops then cuts).

Cutting length and quantity: clients can set the required length and quantity on the PLC touch screen.

5) PLC control system

Using the Mitsubishi PLC control system from Japan control the quantity and length automatically on the LCD screen.

Frequency converter to regulate the turning speed

l Business Conditions

Payment Term: 30% T/T in advance, 70% T/T or L/C before shipment.

Delivery Time: Within 65 Work Days after receipt of the down payment.

Warranty: 12 months since the date of B/L.

Installation and Commissioning: 1 or 2 professional engineers will be sent for installation and commissioning, and the buyer should pay 100 USD/day for each one, besides, the accommodation and the round-trip ticket are also on the buyer’s side.