Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Fluid Bed Drying Equipment

1.Automatic feeding, 2.Low dust&lower energy consumption, 3.Strong drying strength, 4.ISO9001:2008&CE - details see: https://www.machineto.com/high-quality-wood-chip-dryer-machine-10290967

Applicationof Palm Fiber Dryer

Coconut shell and palm fiber dryer can be widely used in the following industries: straw press briquettes fuel, charcoal machinery, wood chip granule fuel, sawdust press blocks, farming and animal husbandry engineering industry; it is able to dry agricultural cellulosic-based materials such as: corn straw, soybean straw, cotton straw, wheat straw, sorghum straw, wood chips, wood shaving, sawdust drying, ginkgo leaf drying and mulberry leaves drying, etc

Working Characteristics of Palm Fiber Dryer

AB section: preheating section

palm fibre into dry machine by the feeder, in the action of high temperature hot air to make palm waste to warm up, and to the wet bulb temperature of the hot gas, now palm waste water almost did not change, the hot air temperature has slightly lower, the heat quantity of its release is mainly used for palm waste preheated.

BC section: constant speed drying section

The drying rate is constant figure in this period, Coconut shell and palm waste surface always there surface moisture, heat of hot air transfer to palm waste all used for evaporating. So palm waste surface temperature all along keep the wet bulb temperature and unchanged, hot air temperature and palm waste water falling rapidly.

CD section: drying into the slow down section

Diffusion rate of palm fibre dwater inside less than the vaporizing rate of surface water, the surface of palm waste do not have enough water, so the drying rate slow down. The heat of air transfer to the material more than the quantity of heat of water vaporization consumption, so palm waste surface temperature rise ceaselessly, the air temperature further reduce.

DE section: cooling section

palm fibre moisture content has fallen to request from value, palm waste expel from drying machine, and then into the cooling system, make the dried palm waste temperature reduced quickly, avoid palm waste to absorb moisture from the air again. The palm fibre which after cooling can be directly press block molding.