Home  >  Industrial Supplies  >  Filter Supplies  >  Filter Meshes

1.maximizing flow rates, 2.Perfect integral strength and strong anti-deformation ability;, 3.reduction in operating cost - details see: https://www.machineto.com/high-quality-stainless-steel-johnson-screen-water-well-screen-10218536

1.product intro (water well screen)

water wellscreen is the dominant screen type used in the water well industry. this type of screen is constructed by winding cold rolled triangular V-shaped wire around a circular array of longitudinal rods. the wire is welded to the rods and produces a rigid unit that has high strength and minimum weight.

2.advantages (water well screen)

1)MAXIMIZING FLOW RATES water well screen with high open area.

2)NON-CLOGGING SLOT water wellscreen have V-shaped openings that narrowest atthe outer face and widen inwardly. thus, oversized particles are retained outside the screen and particles passing through the narrow outside opening can enter the screen.

3)REDUCTIONS IN OPERATING COSTS

Lower through-slot velocities mean that pressure drops are minimized, therefore;Drawdowns are reduced.Less energy is needed for pumping.Flow rates are increased.

Less sand in the water reduces wear on the pumps. (water wellscreen)

3 application(water well screen)

water well screen is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry.

Specification (wedge wire)	Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00
Specification (support rod):	Width(mm): 2.30 3.00 3.30 3.70 Height(mm): 2.70 3.60 4.70 5.60 6.30 Round: From 2.50mm to 6.0mm
Note: other specifications available as per request
Slot size	0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.
Material:	galvanized low carton (LCG), stainless steel (304,316 etc.)
Length	up to 6 meters.
Diameter	from 25mm to 1200mm.
End connection	Plain beveled ends, flanged or threaded couplings