High Quality Pyrolysis Equipment Made In China

1)High oil yield, 2)100% Pollution-free, 3)Energy conservation, 4)Automatic welding, 5)Safety - details see: https://www.machineto.com/high-quality-pyrolysis-equipment-made-in-china-10340657

Condition:New	Type:Tire Machine	Tire Machine Type:Tire Recycling Machine	Place of Origin:HEN,Xinxiang ,Henan,China China (Mainland)
Brand Name:XinDa	Model Number:XDZ-G6	Voltage:380V	Power(W):13KW
After-sales Service Provided:Engineers available to service machinery overseas	Raw material:waste tire/rubber/plastic/tyre	Output Products:tyre oil, carbon black, gas, steel wire	Structural form:Horizontal
Model of cooling:water cooling	Coolling Area:92 sq.m	output:5tons/6tons/8tons/10tons/12tons/20tons/22tons	Reactor material:Q245R or Q345R
Thickness of reactor:12mm/14mm/16mm/18mm	Warrant:5 years

Pyrolysis Equipment

We manufacture and supply used tyres pyrolysis machine, and has been exported to India, Pakistan, Korea, South Africa and so on.

The brief introduction of Pyrolysis Equipment

The component of 6th generation Pyrolysis Tire to Oil Machine mainly includes auto-feeder, reactor, catalytic chamber, horizontal heat exchanger, oil-water separator, oil tank, vertical condenser, horizontal condensr, anti-back fire device, vacuum device and dust remover.

1. The Model and Capacity

Size of reactor furnace and capacity
24 hour capacity	Specification of Reactor
3T	Φ1500mm×L4000mm×T14mm
5T	Φ2000mm×L6000mm×T14mm
6T	Φ2200mm×L6000mm×T14mm
8T	Φ2200mm×L6600mm×T14mm
10T	Φ2600mm×L 6600mm×T16mm
12T	Φ2800mm×L 6600mm×T16mm
2 reactors with 1 set of condenser	Φ2600mm×L 6600mm×T16mm

The reactor decides the whole machine’s service life. Our machines use the Q245R or Q345Rboiler steel plate as material, the two material are high temperature and high pressure resistant.

2.Diagram of Pyrolysis Equipment

3 Fuel:

The fuel can be fuel oil, heavy oil, coal, fire wood.

4.Feeding Inlet

The 6th generation Pyrolysis Equipment has two feeding inlet, the big feeding inlet diameter reachesto 1200mm for the whole tire into reactor, no need to cut the tire into pieces, the small one is720mm for more amount. We use 12pieces rip plates welded on the outsideof reactor to strengthen the weld place between inlet and reactor, which can assure thereactor’s life longer.

5.The Insulating Layer

The 6th generation Pyrolysis Equipment , the insulating layer is designed to whole thermalinsulation layer of heat preservation. The reactor insulating inner layer is made oflevel 1 aluminum silicate rock wool and refractory concrete material, outer layer ismade of arc steel plate, not only good looking, but also well sealed.

6.The bottom of the reactor will slowly heat by fuels (wood,coal,charcaol or electricity).The temperature reaches 150--200°C, we can get the oil gas gradually and when the temperature reaches 400°C we can get most quantity oil.

7. Safety system

Safety system: there are water seal tank in the set of plant, they can prevent gas back steaming and clean the aste-gas to make the plant more safety.

There are safety alarms in the temperature gauge and pressure gauge.so when the temperature and pressure is abnormal, the alarms will ring. then you should do some safety precautions in time.

8 Delivery time:

We will delivery the machine within 25days after receving deposit.

9 After-sale service:

1) The warranty time: we guarantee the main reactor 5years, other parts one year expect the wearing parts.

2) Beyond the warranty time, if the buyer need the seller's technician to repair equipment, the buyer should provide the accommodation and round-trip ticket.