High quality Hengchang ISO9001:2008 6-S Gold shaking table, Gold Mining equipment with low price

Very high recovery rate 6-S series Gold Mining equipment

1.6-S Gold Mining equipment is in the beneficiation process on complex a tilt bed plane, ore particle swarm from the bed surface angle to the trough into, at the same time by lateral flushing water supply to the water tank, and the mineral particles in gravity, lateral flow momentum, bed reciprocating asymmetric motion produced by the inertia and friction effects next, according to the proportion and hierarchical granularity, and along the bed surface for longitudinal movement along the inclined bed surface and transverse motion.

The ore and water feeding hole of 6-S Gold Mining equipment

2. Therefore, the proportion and size ofdifferent particlesalong their direction of movement gradually from a to b while fan-shaped shed, respectively, different areas of the port from concentrate and tailings discharge, was eventually divided into concentrate, middlings and tailings.6-S GoldMining equipmentwith rich ore ratio, high separation efficiency, the guarding easy, easy to adjust the stroke. Changing landscape gradient and stroke can still maintain a bed running balance spring placed within the box, compact, and be able to arrive at a final concentrate and then the final tailings.

The surface Deck of 6-S Gold Mining equipment

6- S Gold Mining equipmentis one of the main equipment of gravity concentration , it is widely used in the selection of tungsten, tin , tantalum, niobium and other rare metals and precious metal ore . Roughing, selected scavenger can be used for different operations ,separating coarse ore ( 2- 0.5mm) , fine sand ( 0.5 - 0.074mm ), slime ( -0.074mm ), different grain size . Can also be used to choose the iron, manganese ore and coal . When dealing with other minerals such as tungsten , tin , table effective recycling granularity range of 2-0.22 mm.

The bottom steel support of 6-S Gold Mining equipment