Home  >  Raw Material Processing Machinery  >  Rubber Product Making Machinery

1.CE,SGS,ISO, 2.Bush:Nylon bush,ball bearing bush., 3.Gear box:hardened and planet gear box, 4.Cooling system - details see: https://www.machineto.com/high-quality-factory-sell-rubber-mixer-10339361

100% Real Manufacturer,

Welcome to visit our factory and we can show you the machine in working condition:

If our products win your interest, please send us inquires and we will provide detailed information to you. We can also make machines according to your request.

8:00-20:00(China time) from Mon to Sat: Reply in 30 minutes

Advantage:

Technical data of X(S)N Series Pressing Turn Over Kneader(Kneader, Kneader Machinery):

This product employed the advanced technology introduced from Japan and its the fruit of the cooperation with Taiwan.

It is widely used in the plasticization of rubber and plastics and in the mixing of the various sizing material sand plastics.

1. The general-purpose chassis adopted in its bottom to facilitate its fixing and check.

2. The decelerator withhard-facing gearmakes its transmission steady, least noisy and everlasting.

3. The sealed coil electrical machinery can resist dirt and has great starting moment.

4. The intermediate of the kneading-room is mainly made of alley steel at the same time its surface ishard-plated with chromium, so it’s beautiful and wear-resisting.

5. In the middle of the alley steel rotor is a hole which can cool or heat the rotor (oil heating or vapour heating). The projecting part of the rotor is made of hard alley with hardened surface. Its smooth shining and it lasts well.

6. Since we applied the advanced foreign high-tech, we get excellent result in sealing.

Thermal Resistance:

There is a plug-in thermal resistance in middle section of the bottom of the chamber to be connected to electrical system to inspect and display the temperate.

Rotor:

It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and polishing.

Cooling/heating system:

A common piping system is adopted for either cooling or heating material in mixing operation. Through the system cooling water or steam is fed in three ways to the cavities of the rotors blades, the mixing chamber and the top ram.

Tilting mechanism:

It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc.. It is able to actuate the mixing chamber tilting by 140° around the front rotors.

Dust sealing device:

At the joint between the top of the mixing chamber and the cantilevered arm of the machine frame, the dust sealing assemblies with curved slotted partings are used obtaining an excellent and reliable sealing purpose.

The end face of the rotor is sealed by end contact sealing with nor oil-lubrication and is seals well and is wear-resistant and durable.

Main driving system:

The part is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of the rotors with running face one other.

Hard Gear Gearbox ,6 degree meshing

Pneumatic control system:

Pneumatic control system is controlled by XG order. The bi-directional air cylinder makes the ram up or down. In case the over load occurs in the mixing chamber, the top ram can be raised automatically or manually if necessary, so as to protect motor from overload.

Electric control system

Imported PLC device and electric control components which are all imported products or imported technology products are adopted in the electric control system as to raise control reliability.

Detail Parameter of the Kneader Machine :

Parameters	VERSION
	X(S)N-35/30	X(S)N-55/30	X(S)N-75/30	X(S)N-110
Net chamber volume	75	125	175	250
Working volume	35	55	75	110
Front/back rotor friction ratio	1.22	1:1.22	1:1.22	1.22
Power	55	75	110	160
Main motor rotation speed	985	985	985	985
Turn angle	140	140	140	140
Size	3200*1900*2950	3750*1950*3050	3760*2143*30500	3930*3000*3660
Weight(kg)	6500	7800	10000	16000

.

welcome to visit our factory , we will show you the machine in working condition.

next