Home  >  Construction Machinery  >  Building Material Machinery  >  Other Construction Material Making Machinery

Discontinuous PU sandwich panel product line, 2.suitable for building refrigerator house, 3. other small constructions. - details see: https://www.machineto.com/high-quality-discontinuous-pu-sandwich-panel-product-line-10079947

High Quality Discontinuous PU sandwich panel product line

Brief introduction

The product line is consisted of the press and the rail stands. Two worktables are to move into the press and the other two stay on rail stands. Initially, put the top and the bottom facing sheets inside of mould frames and then do the necessary sealing work. After that, feed the worktables into the press. When worktables inside the press moves out orderly, the other two feed in at the same time. Upon the finish of feeding, the press will close and slant at a angle, waiting for the injection PU raw materials from the PU mixing head into different panels. Meanwhile materials start foaming and curing. At this time, mould frames on worktables moved out can be opened and the finished products can be unloaded to get ready for next production cycle.

Advantages:

1.panels are produced faster than conventional ones: demoulding times are 30-35% shorter

the average distribution foam - at equal overall density - is better than in conventional panels

2. scrap parts - and all relevant disposal or repairing costs - are virtually eliminated nice and clean quality panels are supplied, with very high

mechanical properties and state-of-the-art insulation efficiency

Technical Parameters

Length of panel: 6m,12m,15m

Width of panel: 500-1250mm

Thickness of panel: 40mm-250mm

Speed of Production line: 8m/min ( frequency conversion to adjust speed )

Core Density (Kg/m2):40-42

Thermal Conductivity (W/m°K):0.018 – 0.020

Tensile Strength (KP a) :300–500

Bending Strength (KP a): 550–560

Shear Strength (KP a):120–300

Modulus of Elasticity (Mp a):3.0 – 8.5

Water Absorption :<2(Volume change %)

Water Vapor Transmission :1.8-3.8(Perm-in)

Stable Operating Temperature:-40to+50(°c)

the capacity:

One set of 6m PU Sandwich panel line is 288 sq.m. per day, 8 hours, so it is 72000 sq.m.yearly

with 2500 days per year

One set of 12m PU sandwich panel line is 576 sq.m. per day, 8 hours. so it is 14400 sq.m. yearly,

for 250 days per year.

3. PU SANDWICH PANEL PRESS

2+2 PU sandwich panel

overall power equipment:60 kw

size of the line :

overall length of the line :38000mm ,

overall width of the line : 4500mm(max)

overall height of the line :2200mm

overall weight of the line:~25 t

PU foaming machine

Production capacity of this production line: 3-8m/min.

Panel width: 800-1000mm, panel thickness: 30-150mm.

Total power: about 150kw

PU foam machine

PU foaming at both side

2+2 PU Press mold SPDPU

Operating press:
A. put one piece of cut flat steel sheet on the moulding frame, another piece of steel sheet down the moulding frame.
B. Inject PU foam into the closed moulding frame with the aluminum edge mould,
C. After 10-30 minutes (according to PU material and operation experience), lift the press, move the moulding frame, then get the PU sandwich panel.
Use electrical motor to control lifter of the moulding.
We provide automatic moulding with electrical control (electrical button, not PLC). The thickness of the sandwich panel can be adjusted.
Steam pipes are fixed for heat preservation on the press machine.

• Temperature of steam is 40-45 degrees.
• Steam bank and steam boiler should be prepared by buyer.
• Size of flat PU sandwich panel: 12m*1.25m*(50mm-200mm)
• Size of moulding machine: 7.5m*2m*2m
• Power: 10kw
• Capacity: 2-6pieces/h
• Workers for moulding machine:3- 4 persons.