Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Pumps

1.Japanese quality concrete pump, 2.Lightweight, small form, ultra performance, 3.Pumping power unmatched by other products - details see: https://www.machineto.com/high-performance-cement-pump-machine-for-construction-10093192

High performance cement pump machine for construction

50m/m high-pressure hose	3.3m 1piece
50m/m Mortar hose	10m 2piece
remote control switch	50m 1piece
sponge	10piece
industrial tool	1set

•Fully-equipped layout designed for efficiency and safety

•Short body suitable for tight turns

•4-step oil-based hydraulicretraction/extension

•5-step boom (3-step bending and 2-stepextend/retract

•Takes a mere 15 minutes to swap out the pumping tube

•Coating with tube grease takes just one touch

♣Automatic control by a pressure switch

A pump pressure rise to20kg/cm²causes an

alarm buzzer to sound, warningthe user of problems

with the material or a bent hose. If pressure reaches

30kg/square cm, the power is automatically cut off,

preventingclogsfrom breaking the pump, pumping tube or hose apparatus.

♣Cone type hopper

The cylindrical hoppermaintainsmaterialbalance and

even distribution, helping to prevent clogsand clumping

inside the hopper.This design improves onprevious angular

hopperbyensuringthat excess mortar won’t stick to the sides.

The result is easy cleanup after the job is done.

♣Economical efficiency of a pumping tube

With squeeze-type pumps, the slope of the exterior pump opening

is usually determined by the size of the drum. The bigger the drum,

the longer the tube becomes.However,all of thesemodels except the

portable ones allow you to usethe same drum to achievetheresults

you would get witha larger drum. This also prevents unnecessarytube

bends. Finally, the tube’slarge caliber (65φ, 50φ)and thicknessmake it

surprisingly durable.

♣remote control

Remote control is standard D-65, D-50, D-35MF, dual-purpose type

100V/200V.· D-45 (when using the motor), portable pump is equipped

with order D-15EY.

This mortar pump can be used for not only mortar and raw concrete,

but the following uses, too:

Drainage: Factory drainage and sludge removal, transporting dehydrated

cakes, facilities working with clear water and sludge, drainage facilities,

removing sludge and initial impurities at sewage treatment facilities, removing

surplus sludge, re-depositing sediment, transporting digested sludge, pumping

sludge, pouring sludge, pumping dehydrated cakes, pumping chemical grout

Construction and public works projects: different mud and earth types, plaster,

chemical slime, sludge, wall clay, earth and sand, sewage, clay, bentonite, pouring

spray-application materials used for water repellence, spray-application tunnel

shielding jobs, grout pouring, etc.

Other uses: feeding fish in a hatchery (chunking/mincing sardines, etc.),

preparing feed in pig farms, etc.

Remote control box. Specially designed with a 50m cord.

Twin 100V/200V spec

If used with a generator, please use a 10kw or higher capacity generator.

This equipment can also be used for spraying if a compressor is attached.

Suitable for a range of applications: from laying down dirt floor foundations to

transporting wall materials

Fully equipped with the longest boom in its product class: 18.5m. (Height above ground/diameter)