Home  >  Chemical Process Machinery  >  Separation Equipment

1. ISO 9001:2008&CE., 2. High efficieny to up 95%, 3. We have 18 years proffessional experience, 4.Smallest mesh size:500 mesh - details see: https://www.machineto.com/high-efficiency-centrifugal-separator-for-gypsum-powder-10302633

High Efficiency Centrifugal Separator for Gypsum Powder

1.What material is the Airflow sieving machine suitable for screening ???

Through the sieving use of materials to 20-150 meshrubber chemicals,120—180 meshlight calcium, 300 meshhaw powder, 320-500 meshzinc powder, 500 meshblack iron oxide,red iron oxide, 120—160 meshChinese medicine powder, 100 meshgypsum powder.

The output per hour is about 1 metric ton in the sieve mesh area of one square meter ., and the sieving efficiency we measured is more than 95%

2.Why is the Airflow sieving machine green ???

Micro-fine powder materials is easy to adhere , possessing with small-diameter particles , light quality , easy floating etc .

But the airflow sieving machine realize fully enclosed screening .

The dust content in the air is lower than 10 mg / m3/.

3.principle of work

WS series airflow sieving machine abandons the working principle of gravity potential energy , and adopts such working principle which the air is a carrier and the kinetic energy does words .

After mixing the materials and air through the negative pressure airflow , and put them into the vane of the sieve motor , impose the leaf , and then spray out of the net to the bucket-type sieve mesh , finally collect them through the volute .

The over-diameter materials couldn’t pass the net , discharge them from the exit automatically , reach the purpose of fast sieving .

4.Features

• high sieving efficiency : more than 95% .

• the output is about 5—10 times or more than vibration sieve .

• wide scope of fineness : powder materials with the size of 80-530 meshes is able to sieve with high efficiency .

• precision of products fineness : no excess and mixture grade .

• install uprightly , long life for using

• sieving procedure is processing under negative pressure and half –cycle , no powder pollution

• be matched with all kinds of the mill and wind grid

• low noise , low waste electricity , continuous working , less maintenance .

5.Parameter

Parameter	WS-600	WS-1000	WS-1600	WS-2000
Airflow(m3/h)	240	300	460	720
Screen mesh	80-600 mesh
Material size(mesh)	< 40 mesh
Motor power(KW)	3	5.5	15	18.5
Rotation rate(r.m.p)	1450	960	828	548
Diameter(mm)	φ600	φ1000	φ1600	φ2000
Height(mm)	1550	1730	2400	2400

6. Working Demo

7. Screen mesh

8. Customer working site