Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

Features:, 1.Elongation : >350% -->450%., 2.Belt width (mm): 250-2,100., 3.thickness:5-50mm., Abrasion loss:< 120mm3(24mp). - details see: https://www.machineto.com/high-abrasion-rubber-conveyor-belt-10197349

Usage:

Suitable for coal mine, constructures, factories, ports, docks, long distance, high strength, large volume of use.

Varieties:

According to cover the performance can be divided into: ordinary type, smoldering, heat-resistant, wear-resistant, and resistant to Cold type, acid type, oil type varieties.

FEATURE:

A:EP multi-ply is one of the best quality synthetic fibers that the rubber industry
uses nowadays. The EP multi-ply cascass is woven by polyester in warp and polyamide
in weft, it is most widely used fabric in rubber industry, and its outstanding
merits are high abrasion resistance, high tensile strength;

B:EPConveyor belts has the characteristics of the low elongation in warp and good trough ability in weft, good water resistance, wet strength is not reduced, not mildew, initial modulus polyester high, desirable safety coefficient is low.

C:EP Conveyor belts are suitable for long-distance and high speed under the condition of high load conveying material, which is widely used in mining, metallurgical
industry and architectural industry and ports.

The detail data for EP Coneyor belt as following form:

Specification and technical data of multi-ply EP conveyor belt Fabric specs Ply thickness (mm/p) Strength series (N/mm) Cover Thickness (mm) Width Length 2ply 3ply 4ply 5ply 6ply Top Bottom mm m EP80 0.8 160 240 320 400 480 2.0--8 0--4.5 300 -- 2500 ≤300 EP100 0.8 200 300 400 500 600 2.0--8 0--4.5 300 -- 2500 ≤300 EP125 0.85 250 375 500 625 750 2.0--8 0--4.5 300 -- 2500 ≤300 EP150 0.9 300 450 600 750 900 2.0--8 0--4.5 300 -- 2500 ≤300 EP175 1 320 480 640 800 960 2.0--8 0--4.5 300 -- 2500 ≤300 EP200 1.2 400 600 800 1000 1200 2.0--8 0--4.5 300 -- 2500 ≤300 EP250 1.4 500 750 1000 1250 1500 2.0--8 0--4.5 300 -- 2500 ≤300 EP300 1.5 600 900 1200 1500 1800 2.0--8 0--4.5 300 -- 2500 ≤300 EP350 1.7 700 1050 1400 1750 2100 2.0--8 0--4.5 300 -- 2500 ≤300 EP400 2.2 800 1200 1600 2000 2400 2.0--8 0--4.5 300 -- 2500 ≤300 EP500 2.5 1000 1500 2000 2500 3000 2.0--8 0--4.5 300 -- 2500 ≤300 Adhesion and elongation of belt Belt carcass Adhesive strength elongation Between plies(N/mm) Between rubber and carcass Longitudinal elongation at break%≥ Longitudinal elongation at reference load%≤ EP canvas ≥5 ≥5 10 2.0 Technical data of cover rubber Cover grade Tensile strength ≥ Elongation ≥ Abrasion ≤ Change rate of tensile strength and elongation after aging MPa % mm3 % RMA1 17 400 175 -25+25 RMA2 14 350 250 -25+25 Z 15 350 250 -25+25 Y 20 400 150 -25+25 X 25 400 120 -25+25 W 18 400 90 -25+25

PHOTO SHOW: