Home  >  Packaging Machinery  >  Packaging Line

Max unwinding diameter: 2600mm, Maximum rewinding diameter: 1400mm, Put the reel diameter: 3in, Rewinding diameter: 3in - details see: https://www.machineto.com/hfj-2600series-center-surface-winding-high-speed-slitting-machine-10061615

Uses:
This machine is suitable for slitting various printing and packaging polypropylene, polyethylene film composite, paper, BOPP, PET, PE, PVC sheet, aluminum foil, copper foil, pearl film a variety of rolling material for longitudinal slitting .
Features:
1, round knife slitting, biaxial staggered surface winding, flat cut end.
2, Unwinding optical correction.
3, to close Releasing tension adopts magnetic powder control.
4, the host imported inverter control.
5, especially suitable for slitting narrow range of 5mm or more difficult reel material.

HFJ-D600 Series Center Surface Winding High SpeedSlitting Machine
First, the main technical parameters
Max unwinding diameter: 2600mm
Maximum rewinding diameter: 1400mm
Put the reel diameter: 3in
Rewinding diameter: 3in
Roll surface width: 650mm
Mechanical speed: ≤ 160m/min
Maximum working width: 600mm
Minimum slitting width: 5mm
Correction accuracy: ± 0.3mm
Host power: 3KW
Total power: 3.5KW
Dimensions (LxWxH): 1200 × 1700 × 1400mm (specifications according to factory standard)

Second, the machine main components

The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.

(A) unwinding institutions
The agency has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of 600mm, 600mm phi diameter
Paper tube clamping method: air shaft clamping
Specifications: 3in 1 root of the air shaft
A pneumatic gun
Tension control: closed-loop tension control.
Specifications: tension sensor 50kg 2
Automatic tension controller 1
The output control: 50N.M, magnetic brakes
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
Specifications: a photoelectric eye
Two linear bearings
A corrective institutions
The photoelectric eye fine-tuning 2 sets

(B) cutting machine configuration

The agency uses carbide precision disc disc knife (slitting relatively thick aluminum foil, paper and other materials) or (and) straight knife cutting (slitting general plastic film), neat incision, long life, cutting up and down knife shaft width adjustment processing, between the upper and lower blade shaft gear speed matching. Turning the handwheel implementation under the knife, the knife continues to rotate automatically rely.

Tool axis: under the knife shaft each one

2 locking device: a fast by knife device, able to lock on the knife shaft, to avoid slitting knife from the up and down or move due to quality problems.

Specifications: a rocker arm

A locking shaft

With gear

A worm gear

3. Row waste: by blowing high pressure air feed tube diversion, the scrap material to exclude

Specifications: 1 fan

A duct

4 main wall: steel wall panels, effective shock absorption, enabling machine high-speed and stable operation.

Specifications: 30MM

5. Guide rollers: chrome plated, polished.

Specifications: φ80 × 650mm certain

(C)the rolling bodies
The agency uses the left-right axis biaxial winding winding with pressure arm balance internal and external pressure. The transmission uses two independent magnetic particle motor drive uniaxial tension adjustable.
Winding Specifications: range up to 600mm, diameter 400mm
Paper tube clamping means: air shaft clamp (according to customer material specifications)
Specifications: 3in 2 root of the air shaft
Rewinding pressure: differential pressure pneumatic compression, the pressure can be adjusted by pneumatic pressure regulator
Specifications: Pressure arm 2
Cylinder 2
Tension control: magnetic motor constant torque output
Specifications: motor controller
Winding execution: magnetic motor 2 (specifications 50N.M)

(D) transmission mechanism

The inverter is used to control the main motor operation, convenient lifting speed, the speed adjustment the excessive soft, smooth.

Drive mode: General inverter control of AC motor drive

Specification: 3KW exchange motor

Supporting vector inverters (domestic well-known brand, quality assurance)

(E) Major appliances:

Centrally electric control cabinet box, elegant, and easy to operate.

Operation of a cabinet

Comptroller display a realistic real-time linear velocity, Hutchison meters automatic stop function (with deceleration stop function, Hutchison Mickey the error)

Optical correction controller 1

Button, contactors, air switches

Users themselves:

1.50 Hz, 380V three-phase five-wire power supply

2 foundation treatment

Mounting equipment and commissioning of the raw materials, auxiliary

TERMS & CONDITIONS:

1.PAYMENT TERMS:	30% deposit by T/T and 70% by T/T one week before of shipment
2.PRICE TERMS:	F.O.B NINGBO
3.DELIVERY TIME:	20-25 days after we receive your desposit.
4.PACKING:	Wooden case packing
5.GUARANTEE:	1 year,the after service is lifelong

ITEM	DESCRIPTION	QTY	UNIT PRICE
1		1	F.O.B NINGBO RMB
The price is valid for ten days